Toshiba 72MX195, 62MX195 Using the auto aspect ratio feature, To set the scroll settings

Chapter 8: Using the TV’s features

Scrolling the TheaterWide¨ picture (TheaterWide 2 and 3 only)

You can set separate scroll settings for TheaterWide 2 and TheaterWide 3 modes for each input.

To set the scroll settings:

1.Press INPUT on the remote control or TV/VIDEO on the TV to select the input for which you want to set the picture size and scroll settings.

2.Press MENU and open the Video menu.

3.Highlight Theater Settings and press ENTER.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

Navigate Select CH RTN Back EXIT Exit

4.In the Picture Size field, select either TheaterWide 2 or TheaterWide 3 (you cannot scroll in any other mode).

5.Press z to highlight the Picture Scroll field.

6.Press x or • to scroll the picture up and down as needed, from Ð10 to +20.

Theater Settings

Picture Size			Theater Wide 2
Picture Scroll		-5
Cinema Mode				Film
Auto Aspect Ratio				On
	Reset		Done

7.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the picture size is automatically selected when one of the following input sources is received:

¥A 480i signal from the VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD-1, or ColorStream HD-2 input.

¥A 1080i, 480i, 480p, or 720p signal from the HDMI input.

Aspect ratio	Automatic aspect size
	(automatically selected
of signal source
	when Auto Aspect is On)
4:3 normal	Natural (with sidebars)
4:3 letter box	TheaterWide 2
16:9 full	Full
Not defined	User-selected picture size
(no ID-1 data or )
	(see pages 72–73)
HDMI aspect data)

Note:

¥The auto aspect ratio feature is not applicable to antenna or Cable input sources.

¥The auto aspect ratio feature is not available when the POP double-window is open, the Freeze mode is active, or the TV Guide On Screenª system is open.

To turn on the auto aspect ratio feature:

1.Press MENU and open the Video menu.

2.Highlight Theater Settings and press ENTER.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

Navigate Select CH RTN Back EXIT Exit

3. In the Auto Aspect Ratio field, select On.

Theater Settings

Picture Size			Natural
Picture Scroll		-1
Cinema Mode				Film
Auto Aspect Ratio					On
	Reset		Done

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

To turn off the auto aspect ratio feature:

Select Off in step 3 above.

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 79

Downloaded from www.Manualslib.com manuals search engine