13
HM67 (E/F) Web 213:276
Chapter 2: Connecting your TV

Overview of cable types

Coaxial (F-type) cable

Coaxial (F-type) cable is used for connecting your antenna,
cable TV service, and/or cable converter box to the ANT input
on your TV.

Standard A/V cables (red/white/yellow)

Standard A/V cables (composite video) usually come in sets of
three, and are for use with video devices with analog audio and
composite video output. These cables (and the related inputs
on your TV) are typically color-coded according to use: yellow
for video, red for stereo right audio, and white for stereo left
(or mono) audio.

S-video cable

S-video cable is for use with video devices with S-video
output. Separate audio cables are required for a complete
connection.
Note: An S-video cable provides better picture performance
than a composite video cable. If you connect an S-video cable,
be sure to disconnect the standard (composite) video cable or
the picture performance will be unacceptable.

Component video cables (red/green/blue)

Component video cables come in sets of three and are for use
with video devices with component video output.
(ColorStream® is Toshiba’s brand of component video.) These
cables are typically color-coded red, green, and blue. Separate
audio cables are required for a complete connection.
Note: Component video cables provide better picture
performance than a standard (composite) video or S-video
cable.

HDMI cable

HDMI (High-Definition Multimedia Interface) cable is for use
with devices with an HDMI output. An HDMI cable delivers
digital audio and video in its native format. This cable carries
both video and audio information; therefore, separate audio
cables are not required for a complete HDMI device
connection (-page 19 and page 21).
Note: HDMI cable provides better picture performance than a
standard (composite) video or S-video cable.

Dual-wand IR blaster cable

Dual-wand IR blaster cable is for use with video devices with
IR (infrared) remote control. This cable can be used with the
TV’s IR pass-through feature (-page 17).
To obtain IR blaster cable:
Visit www.ceaccessories.toshiba.com.

Optical audio cable

Optical audio cable is for connecting receivers with Dolby
Digital or PCM (pulse-code modulation) optical audio input to
the TV’s DIGITAL AUDIO OUT terminal (-page 20).

Analog RGB (15-pin) computer cable

Analog RGB (15-pin) computer cable is for connecting a PC to
the TV’s PC IN terminal (-page 21).

About the connection illustrations

You can connect different types and brands of devices to your
TV in several different configurations. The connection
illustrations in this manual are representative of typical device
connections only. The input/output terminals on your devices
may differ from those illustrated herein. For details on
connecting and using your specific devices, refer to each
device’s owner’s manual.
50HM67_EN.book Page 13 Thursday, March 29, 2007 11:28 AM