Toshiba 57HM167, 65HM167, 50HM67 manual To view antenna or Cable channels, To view the DVD player

50HM67_EN.book Page 16 Thursday, March 29, 2007 11:28 AM

Chapter 2: Connecting your TV

Connecting a DVD player with ColorStream® (component video), a VCR, and a satellite receiver

Your TV has two sets of ColorStream® (component video) inputs.

TV back panel

		AUDIO
		OUT
Y	PB	L
		PR

COMPONENT VIDEO S-VIDEO VIDEO R

OUT OUT

DVD player with component video

From satellite dish

				AUDIO
				OUT
Y	PB	PR		L
Satellite	COMPONENT VIDEO S-VIDEO		VIDEO	R
IN		OUT	OUT

Satellite receiver with component video

		From antenna
Stereo VCR
VIDEO	AUDIO
L	R
	IN	IN from ANT
		CH 3
		CH 4
	OUT	OUT to TV
	L R

You will need:

•coaxial cables

•standard A/V cables

–For better picture performance, if your VCR has S-video, use an S-video cable (plus the audio cables) to VIDEO 2 on the side panel (instead of to VIDEO 1). Do not connect both types of video cable to VIDEO 2 at the same time or the picture performance will be unacceptable.

–If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal using the white audio cable only.

•standard audio cables

•component video cables

–You can connect the component video cables (plus audio cables) from the DVD player or satellite receiver to either set of ColorStream terminals on the TV (HD-1or HD-2). The ColorStream HD-1and HD-2terminals can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance (1080p is not supported).

–If your DVD player or satellite receiver does not have component video, connect a standard A/V cable to VIDEO 2 on the side panel. If your DVD player has HDMI video, see page 19.

To view antenna or Cable channels:

Select the ANT video input source on the TV.*

To view the DVD player:

Turn ON the DVD player. Select the ColorStream HD-1video input source on the TV.*

To view satellite programs using the component video connections:

Turn on the satellite receiver. Select the ColorStream HD-2video input source on the TV.*

To view the VCR or view and record antenna channels:

Turn ON the VCR. Tune the VCR to the channel you want to watch. Select the VIDEO 1 video input source on the TV.*

To record a TV program while watching a DVD:

Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream HD-1video input source on the TV* to view the DVD.

*To select the video input source, press INPUT on the remote control (- page 23). To program the TV remote control to operate other devices, see Chapter 3.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

16

HM67 (E/F) Web 213:276