Toshiba 62HM195, 72HM195 Using the TV’s features, Selecting the video input source to view

8 Using the TV’s features

Selecting the video input source to view

To select the video input source to view:

1.Press INPUT on the remote control or TV/VIDEO on the TV control panel.

2.Press 0–8 to select the input source you want to view, which will depend on the input terminals you used to connect your devices (see Chapter 2).

The current signal source displays in the top right corner of the Input Selection screen.

Input Selection ANT 1

0 ANT 1

1Video 1

2Video 2

3Video 3

4ColorStream HD1

5ColorStream HD2

6HDMI 1

7HDMI 2

8ANT 2

0 - 8 / INPUT to Select

Note:

¥When the Input Selection screen is open, you also can use the yz

buttons on the remote control (or the Channel buttons on the control panel) to change the input.

¥You can repeatedly press the INPUT button on the remote control or the TV/VIDEO button on the TV control panel to change the input.

¥To select an IEEE1394 input source, press the TheaterNet DEVICE button on the remote control (see page 26 and 45).

¥If an IEEE1394 device is the current input, it will appear at the bottom of the Input Selection list; however, it will not display in the list if you change the input source.

¥You can label the video input sources according to the specific devices you have connected to the TV (see ÒLabeling the video input sourcesÓ on the next page).

¥The source can be Òhidden.Ó See page 68 for details.

Numbers

INPUT

y

z

Remote control

TV control panel

CHANNEL {

TV/VIDEO

		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.	67
#01E_067-078_566272HM195	67	7/28/05, 4:44 PM
	Black

(E) 56/62/72HM195