Toshiba 72HM195, 62HM195 owner manual TheaterWide 2 and 3 only, To set the scroll settings

Chapter 8: Using the TV’s features

Scrolling the TheaterWide¨ picture

Using the auto aspect ratio feature

(TheaterWide 2 and 3 only)

When the auto aspect ratio feature is set to On, the picture size

You can set separate scroll settings for the TheaterWide 2 and

is automatically selected when one of the following input

sources is received:

TheaterWide 3 modes for each input.

•

A 480i signal from the VIDEO 1, VIDEO 2, VIDEO 3,

To set the scroll settings:

ColorStream HD-1, or ColorStream HD-2 input.

1. Press INPUT on the remote control or TV/VIDEO on the

•

A 1080i, 480i, 480p, or 720p signal from the HDMI input.

TV to select the input for which you want to set the picture

size and scroll settings.

Aspect ratio

Automatic aspect size

2. Press MENU and open the Video menu.

of signal source

(automatically selected

when Auto Aspect is On)

3. Highlight Theater Settings and press ENTER.

4:3 normal

Natural (with sidebars)

4:3 letter box

TheaterWide 2

16:9 full

Full

Video

Not defined

Picture Settings

User-selected picture size

(no ID-1 data or

Advanced Picture Settings

HDMI aspect data)

(see pages 72–73)

Theater Settings

Note:

¥

The auto aspect ratio feature is not applicable to antenna or Cable input

Navigate Select

CH RTN Back EXIT Exit

sources.

4. In the Picture Size field, select either TheaterWide 2 or

¥

The auto aspect ratio feature is not available when the POP double-

TheaterWide 3 (you cannot scroll in any other mode).

window is open, the Freeze mode is active, or the TV Guide On Screenª

5. Press z to highlight the Picture Scroll field.

system is open.

6. Press x or • to scroll the picture up and down as needed,

To turn on the auto aspect ratio feature:

from –10 to +20.

1. Press MENU and open the Video menu.

Theater Settings

2. Highlight Theater Settings and press ENTER.

Picture Size

TheaterWide 2

Picture Scroll

-5

Cinema Mode

Film

Auto Aspect Ratio

On

Video

Picture Settings

Reset

Done

Advanced Picture Settings

Theater Settings

7.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset

and press ENTER. Navigate Select CH RTN Back EXIT Exit

3. In the Auto Aspect Ratio field, select On.

Theater Settings

Picture Size			Natural
Picture Scroll		-1
Cinema Mode				Film
Auto Aspect Ratio					On
	Reset		Done

4. To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

To turn off the auto aspect ratio feature:

Select Off in step 3 above.

74		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_067-078_566272HM195	74	7/28/05, 4:47 PM

Black

(E) 56/62/72HM195