35

4.7General

12

3

4

6

7

8

9

10

11

12 13

14

5

Figure 4.7

1Voice Warning – Allows you to use an audible warning (.wav Sound Clip) for when Motion or Sensors are activated.

2Video Loss Alarm Beep – This option enables the internal audio alarm when Video loss is detected.

Video Loss Alarm Output – This option activates Alarm Control Output when video loss I detection. The Alarm Control Output is the last Control Output on the DVR (#16 on a 16ch DVR and #8 on an 8CH DVR)

Video Loss Alarm – This option sends video loss information to the log files.

3OSD Font Size – This option allows you to adjust the On Screen Display Font size for cameras.

4Display Control Status Bar – Enables/Disables Control Status Bar on the Main Display Screen. (See section 3.3).

5OSD Bold – This option makes the OSD Font Bold.

6Display Sensor Status BAR – Enables/Disables the Sensor Status Bar on the Main Display Screen. (See section 3.3).

7Display Motion Detection Area Box – Displays the Motion area box on the Main Screen whenever motion occurs.

8Intensive Recording – The Intensive Recording option increases the FPS recording of a camera that is experiencing an alarm event.

9Beep on Log-in fail – This option activates an audio alarm when a user enters incorrect login information 3 times.

10Auto Sequencing Time (sec) – When the Loop button is activated, the Auto Sequencing Time specifies the amount of time that elapses before switching to the next Screen Division group.