67
6.5PTZ Address Setting
Some protocols support software address settings. The following section explains these settings.
1RX Address 1 – This option was added for a particular line of receivers that support 2 ID addresses. This is the first RX address.
2RX Address 2 – This option was added for a particular line of receivers that support 2 ID addresses. This is the second RX address.
3PT Driver Address – This option is for specifying the PTZ ID address that the PTZ is set to. This option must be set correctly in order for the DVR to communicate with the PTZ. This option can be beneficial when large amounts of PTZ are chained together.
4Previous ID – This option was added for a particular line of receivers that support 2 ID addresses. This option displays the current RX address ID.
1
2
3
4
5
6
5New ID– This option was added for a particular line of receivers that support 2 ID addresses. This option is for entering a new RX address ID.
6Set ID – This option was added for a particular line of receivers that support 2 ID addresses. This option is for setting the new RX address.
6.6Accessing PTZ Menu’s
Some protocols support the ability to access the Internal PTZ Onscreen Menu
1 2 3
4
5
1Camera Menu – This option opens the PTZ Camera menu.
2Select – This option selects an item on the Onscreen menu.
3Close – This option closes the PTZ Onscreen menu.
4Up / Down – The Up and Down buttons on the PTZ controller move through the PTZ menu options.
5Left / Right – The Left and Right buttons on the PTZ controller move through the PTZ menu options and/or highlight options.
Since every PTZ camera is different, the functions of these options can vary slightly.
The Surveillix DVR provides an easy way to access the cameras options. For explanations of what those options are please refer to the manual that came with your camera