NEC NP-P350W, NP-P420X, NP-P350X user manual 110, Security, WPA-PSK/WPA2-PSK/WPA-EAP/WPA2-EAP, Wep

5. Using On-Screen Menu

SITE SURVEY	Displays a list of available SSIDs for wireless LAN on site. Select			—
	an SSID which you can access.
	To select an SSID, highlight [SSID] and use the SELECT → to
	select [OK] and press the ENTER button.
		�����������������������	Wireless access point
		�����������������������	Ad Hoc PC
		�����������������������	WEP or WPA enabled
SECURITY	This will turn on or off the encryption mode for secure transmis-			—
	sion.
	To use encryption, specify a WEP key or encryption key. Select
	your security type appropriate for your computer and the wire-
	less LAN unit.
		DISABLE ����������������	Will not turn on the encryption feature. Your com-
			munications may be monitored by someone.
		WEP(64bit) ������������	Uses 64-bit datalength for secure transmis-
			sion.
		WEP(128bit) ����������	Uses 128-bit datalength for secure transmission.
			This option will increase privacy and security
			when compared to use of 64-bit datalength en-
			cryption.
		WPA-PSK/WPA2-PSK/WPA-EAP/WPA2-EAP
		������������������������������	These options provide stronger security than
			WEP.
	NOTE:
	• The security type, WEP key, and encryption key settings must be the
		same as communication devices such as PC or access point in your
		wireless network.
	• When you use [SECURITY], your image transmission speed will slow
		down.
	• [WPA-PSK], [WPA-EAP], [WPA2-PSK] and [WPA2-EAP] are not avail-
		able when [AD HOC] is selected from [NETWORK TYPE].
SSID	Enter an identifier (SSID) for wireless LAN. Communication can			Up to 32 alphanumeric
	be done only with equipment whose SSID matches SSID for your			characters (case
	wireless LAN.			sensitive).
NETWORK TYPE	Select communication method when using wireless LAN.			—
		INFRASTRUCTURE	���Select this option when communicating with
			one or more equipment connected to the wire-
			less or wired LAN network via a wireless access
			point.
		AD HOC ��������������������	Select this option when using the wireless LAN
			to directly communicate with a computer in
			peer-to-peer mode.
CHANNEL	Select a channel. Available channels vary depending on the			—
	country and region.When you select [INFRASTRUCTURE], make
	sure that the projector and your access point are on the same
	channel; when you select [AD HOC], make sure that the projector
	and your computer are on the same channel.

110