NEC NP-P350X, NP-P420X, NP-P350W user manual 121, Using On-Screen Menu Alert Mail Advanced menu only

5. Using On-Screen Menu

ALERT MAIL (ADVANCED menu only)

ALERT MAIL	This option will notify your computer of lamp replace time or error		—
	messages via e-mail when using wireless or wired LAN.
		Placing a checkmark will turn on the Alert Mail feature.
		Clearing a checkmark will turn off the Alert Mail feature.
	Sample of a message to be sent from the projector:
		The lamp and filters are at the end of its usable life. Please
		replace the lamp and filters.
		Projector Name: NEC Projector
		Lamp Hours Used: 100 [H]
HOST NAME	Type in a host name.		Up to 15 alphanumeric
			characters
DOMAIN NAME	Type in a domain name of the network connected to the projec-		Up to 60 alphanumeric
	tor.		characters
SENDER'S AD-	Specify the sender’s address.		Up to 60 alphanu-
DRESS			meric characters and
			symbols
SMTP SERVER	Type in the SMTP server name to be connected to the projec-		Up to 60 alphanumeric
NAME	tor.		characters
RECIPIENT'S AD-	Type in your recipient’s address.		Up to 60 alphanu-
DRESS 1, 2, 3			meric characters and
			symbols
TEST MAIL	Send a test mail to check if your settings are correct.		—
	NOTE:
	•	If you entered an incorrect address in a test, you may not receive an
		Alert mail. Should this happen, check if the Recipient’s Address is
		correctly set.
	•	Unless any one of the [SENDER'S ADDRESS], [SMTP SERVER'S
		NAME] or [RECIPIENT'S ADDRESS 1-3] is selected, [TEST MAIL] is
		not available.
	• Be sure to highlight [OK] and press the ENTER button before executing
		[TEST MAIL].

121