NEC NP-P350W, NP-P420X Opening and closing the lens cover, Introduction, Rear Foot → page

1. Introduction

Rear

Port Cover for USB Wireless LAN Unit When using the USB Wireless LAN

Unit, first remove the cover. (→ page 141)

Monaural Speaker (10 W)

Terminal Panel (→ page 7)

AC Input Connect the supplied power cord’s three-pin plug here, and plug the other end into an active wall outlet. (→ page 13)

Cable cover connection (right and left)

Screw holes and grooves for the optional cable cover

* This security slot supports the MicroSaver ® Security System.

Opening and closing the lens cover

Slide the lens cover to the left to uncover the lens.

To cover the lens, slide the lens cover to the right.

Remote Sensor (→ page 9)

Lamp Cover (→ page 148)

Built-in Security Slot ( )*

Security chain opening Attach an anti-theft device.

The security chain opening accepts security wires or chains up to 0.18 inch/4.6 mm in diameter.

Rear Foot (→ page 21)

NOTE:

•The lens cover works in conjunction with the AV mute function. Closing the lens cover will turn off the image and sound during normal projector operation; opening it will restore the image and sound.

With the lens cover closed the image and sound is turned off, however the lamp is still lit. If the projector stays this way for about 2 hours, it will turn off automatically.

•Do not pull the lens cover with excessive force or apply strong pressure in either the up or down direction. Doing so can cause damage to the lens cover sliding mechanism!

5