NEC NP-P350W, NP-P420X, NP-P350X 119, PIN Type, Push Button Type, Mation in Applica Tion Menu

5. Using On-Screen Menu

WPS

When the wireless LAN access point connected to the projector supports WPS (Wi-Fi Protected Setup TM), you can use PIN method or push button method to set up the wireless LAN for the projector.

PIN TYPE	Set a 4-digit or 8 digit-PIN code of WPS for your access point to complete setting for the
	SSID security.
PUSH BUTTON TYPE	Press the dedicated button of the access point and the projector’s wireless LAN unit to
	complete setting for the SSID security.

NETWORK INFORMATION

The following information will be displayed when the projector is connected to a network (wired LAN or wireless LAN).

PROJECTOR NAME

HOST NAME

DOMAIN

NETWORK INFOR-	CONNECTION STATUS, IP ADDRESS, SUBNET MASK, GATEWAY, WINS, DNS, MAC
MATION (WIRED	ADDRESS, SSID, NETWORK TYPE, WEP/WPA, CHANNEL, SIGNAL LEVEL, AU-
LAN/WIRELESS LAN)	THENTICATION, AUTHENTICATION PERIOD
DISPLAY THE INFOR-	Turn on or off the display of the network information.
MATION IN APPLICA-
TION MENU

The meanings of these status statements are described below.

Statement	Authentication status
Authenticated	Authentication is done correctly.
Failure	Authentication failed.
Authenticating…	Authentication is in process.
Expired	The digital certificate is expired. Or [DATE, TIME PRESET] is not set correctly.
Time Error	The [DATE, TIME PRESET] has been cleared. Set the correct date and time.

119