NEC NP-P350W, NP-P420X ❸ Projecting images stored in a USB memory device, Starting the Viewer

4. Using the Viewer

❸Projecting images stored in a USB memory device

This section explains the basic operation of the Viewer.

The explanation provides the operational procedure when the Viewer toolbar is set to the factory default.

Preparation: Before starting the Viewer, store images to the USB memory using your computer.

Starting the Viewer

1. Turn on the projector. (→ page 14)

2. Insert the USB memory into the USB port of the projec- tor.

NOTE:

• Do not remove the USB memory from the projector while it’s LED flashes. Doing so may corrupt the data.

TIP:

You can a USB memory insert the projector when the drive list screen is displayed.

3. Press the SOURCE button to select [VIEWER].

A press of the SOURCE button will display the source select screen.

A few more presses of the SOURCE button will display the drive list screen.

Another way to select [VIEWER] is to press the VIEWER button on the remote control.

TIP:

•For more information about the drive list screen, see page 60.

•To display graphics in a shared folder, see page 68; to display still images or movie files in a media server, see page 72.

56