NEC NP-P350W, NP-P420X, NP-P350X  Turning on the Projector, Projecting an Image Basic Operation

2. Projecting an Image (Basic Operation)

Turning on the Projector

1. Slide the lens cover to the left to uncover the lens.

2.Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control.

The POWER indicator will turn to blue and the projector will become ready to use.

TIP:

•When the message “PROJECTOR IS LOCKED! ENTER YOUR PASSWORD.” is displayed, it means that the [SECURITY] feature is turned on. (→ page 30)

•When the ECO message is displayed, it means that [ON] is selected for [ECO MESSAGE]. (→ page 94)

•Pressing buttons such as power button and MENU button will make sound. To turn off the beep sound, select [OFF] for [BEEP] from the menu. (→ page 98)

After you turn on your projector, ensure that the computer or video source is turned on and that the lens cover is open.

NOTE: When no input signal is present, the no-signal guidance is displayed (factory menu setting).

Standby Blinking Power On

Steady orange light Blinking blue light Steady blue light

(→ page 192)

14