NEC NP-P350X, NP-P420X, NP-P350W user manual Operation on computer, User Supportware

8. User Supportware

• Operation on computer

1Click Windows [Start] → [All Programs] → [NEC Projector User Supportware] → [Desktop Control Utility 1.0] → [Desktop Control], in that order.

The “Selection Of Network Connections” window is displayed.

This displays a list of the network devices connected to the computer you are using.

2Select the network device to use and click [OK].

The “Startup password settings” window will be displayed.

•In case of Windows 7/Windows Vista, the User Account Control Window is displayed. Click [OK] or input the administrator password.

Screen when Desktop Control Utility 1.0 is started first time	Screen if starting password has been set
already

IMPORTANT:

•Be sure to write down the starting password in case you forget it.

•The starting password must be input each time Desktop Control Utility 1.0 is started.

•Should you forget the starting password, reinstall the Desktop Control Utility 1.0.

A screen like the one below is displayed when the software is started on a PC installed with Windows XP Service Pack 2 (SP2) (or later).

Click “Unblock” if this is displayed.

178