NEC NP-P350X, NP-P420X, NP-P350W user manual  Turning off the Projector, To turn off the projector

2. Projecting an Image (Basic Operation)

Turning off the Projector

To turn off the projector:

1.First, press the (POWER) button on the projector cabinet or the POWER OFF button on the remote con- trol.

The [POWER OFF / ARE YOU SURE ? / CARBON SAV- INGS- SESSION 0.000[g-CO2]] message will appear.

2.Secondly, press the ENTER button or press the (POWER) or the POWER OFF button again.

The lamp will turn off and the projector will go into standby mode. When in standby mode, the POWER indicator will light orange and the STATUS indicator will light green when [NORMAL] is selected for [STANDBY MODE].

Power On Standby

Steady blue light	Steady
	orange light
	Press twice

CAUTION:

Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal projector operation.

Use caution when picking up the projector.

NOTE:

•While the POWER indicator is blinking blue in short cycles, the power cannot be turned off.

•You cannot turn off the power for 60 seconds immediately after turning it on and displaying an image.

•Do not disconnect the AC power supply to the projector within 10 seconds of making adjustment or setting changes and closing the menu. Doing so can cause loss of adjustments and settings.

25