141, Prepare a Phillips screw driver beforehand | NEC NP-P420X

6. Installation and Connections

Removing and attaching the USB Wireless LAN Unit

NOTE:

•The USB Wireless LAN Unit must be inserted into the USB Wireless LAN Unit port in the correct direction. It cannot be inserted in the reverse direction. If the USB Wireless LAN Unit is inserted in the reverse direction with excessive force applied, the USB port may break.

•Before touching the USB Wireless LAN Unit, touch a metallic object (such as a door knob or aluminum window frame) to discharge the static electricity from your body.

•Always insert or remove the USB Wireless LAN unit when the main power is turned off. Failure to do so may cause projector malfunction or damage to the USB wireless LAN unit. If the projector will not work correctly, turn off the projector, disconnect the power cord, and then connect it again.

•Do not insert other USB devices into the USB Wireless LAN unit port. Do not insert the USB Wireless LAN unit into the USB (PC) port (Type B).

Prepare a Phillips screw driver beforehand.

1.Press the POWER button to turn off the projector and set it into standby condition, and disconnect the power cord.

2. Remove the USB (LAN) port cover.

Loosen the screw securing the port cover.

• The screw is not removable.

2 1

3. Slowly pull out the USB Wireless LAN Unit into the USB (LAN) port.

Keep the cap for later use.

4. Put the USB (LAN) port cover back into place.

Insert the catch of the USB (LAN) port cover into the groove of the projector cabinet, and then tighten the screw to secure the port cover.

To install the USB Wireless LAN Unit, disconnect the power cord and use the above procedure.

NOTE:

• The green LED on the USB Wireless LAN Unit flashes to show that Wireless LAN Unit is working. If the USB Wireless LAN Unit is incorrectly attached, the blue LED will not flash.

• Do not press the button on the USB Wireless LAN Unit. The button will not work with this model.

141

Image 159

NEC NP-P420X, NP-P350X 141, Prepare a Phillips screw driver beforehand, Put the USB LAN port cover back into place

Contents

Model No NP-P420X, NP-P350X, NP-P350W P420X/P350X/P350WPage Machine Noise Information Regulation 3. Gpsgv Safety CautionsPrecautions DOC Compliance Notice for Canada only RF Interference for USA only Important SafeguardsInstallation Important Information Fire and Shock Precautions IiiPlace the projector in a horizontal position Remote Control Precautions About Copyright of original projected pictures Lamp ReplacementLamp Characteristic About High Altitude mode NP02LM2 Important Information Information on Wireless LANCertificate marks and codes of the NP02LM Series English NP02LM1 Vii Product Name Supported countries and areas Viii Important Information FCC Compliance Regulatory Information/DisclaimersIndustry Canada Statement Improper intrusions Contents of transmissions may be interceptedRegulatory Statement France Compliant standards according to model NP02LM1 CCK / Dqpsk / Dbpsk / Ofdm / DS-SS NP02LM2 Xii Table of Contents Xiv Table of Contents OPTIONS1 OPTIONS2 VERSION1VERSION2 Xvi What’s in the Box? Introduction Congratulations on Your Purchase of the Projector Features you’ll enjoy Introduction to the Projector Introduction About this user’s manual Front/Top  Part Names of the Projector Introduction Rear Opening and closing the lens coverThis security slot supports the MicroSaver Security System Introduction Top Features  → page 22Enter Button → Exit Button → → page 33, 34 Introduction Terminal Panel Features Not available on this series of projectors  Part Names of the Remote Control→ page 83 VOL. +- Button → Aspect Button FOCUS/ZOOM Button Slip the cover back over the bat Battery InstallationOperating Range for Wireless Remote Control Press firmly and slide the battery  Operating Environment for Software Included on CD-ROM Download service Introduction Operating Environment  Flow of Projecting an Image Connect your computer to the projector  Connecting Your Computer/Connecting the Power CordConnect the supplied power cord to the projector Projecting an Image Basic Operation Slide the lens cover to the left to uncover the lens  Turning on the Projector To select a menu language, follow these steps Press the Menu button Using the Remote ControlSelecting Default Source  Selecting a Source This chapter drawings and cables are omitted for clarity  Adjusting the Picture Size and Position P350W P420X/P350X Focus P420X/P350X P350WUse the Focus lever to obtain the best focus Projecting an Image Basic Operation Zoom Use the Zoom lever to adjust the image size on the screen Rotate the rear foot Projecting an Image Basic Operation Adjust the Tilt FootAdjusting the left and right tilt of an image Rear foot Lift the front edge of the projector  Correcting Keystone Distortion Manually Adjusting with buttons on the cabinet Press the Keystone button Use the  or  button to correct the keystone distortionPress the Exit button Sound level from the speaker can be adjusted  Optimizing Computer Signal Automatically Turning Up or Down Volume Adjusting the Image Using Auto Adjust To turn off the projector  Turning off the Projector Unplug the power cord Disconnect any other cables  After UsePreparation Make sure that the projector is turned off You can enlarge the picture up to four times To do so Turning off the Image and SoundFreezing a Picture  Enlarging a Picture Convenient Features Press the  buttonPress the D-ZOOM − button Checking Energy-Saving Effect Carbon Meter To enable the Security function Preventing the Unauthorized Use of the Projector SecurityPress the  button to select on and press the Enter button To turn on the projector when Security is enabled Press the Power buttonSelect YES and press the Enter button To disable the Security function Select OFF and press the Enter buttonType in your keyword and press the Enter button Mouse R-CLICK Button works as the mouse right button Operating your computer’s mouse from the remote control Click Yes Use the USB cable to connect the computer with the projector GCT functions Uses Update, Http Server*, Settings and InformationOperate the control window Selects an input source of the projector  Controlling the Projector by Using an Http Browser OverviewPreparation before Use Projector Adjustment Displays how many hours the filter has been used Network Settings Settings Wired or WirelessSetting for Wired LAN Network Type PasswordSsid Site Survey Domain Name USE Digital CERTIFI- CateProjector Name Host Name Wireless LAN Http PasswordEnable Wired LAN With the projector turned on, press the Source button Setting the Projector to Network Projector Input ModeOperation Environment Windows 7/Windows Vista should be satisfied From the Application Menu menu, select Network Projector Click P420 Series Click → Search for a projector recommended Exiting the Network Projector Operation Remote Desktop Checking the IP address on Windows Setting the Remote Access Click Details Starting the Remote Desktop Network menu will be displayed Convenient Features Exiting the Remote Desktop Playback requirements ❶ What you can do with the ViewerSupported graphic formats Supported movie files File name extension Supported file format Using the ViewerSupported PowerPoint files Supported USB memory devices UDP TCPUDP/TCP Using Print Command ❷ Preparing presentation materialsSave a file to your drive ❸ Projecting images stored in a USB memory device Starting the ViewerPress the Source button to select Viewer Press the button to select USB1 and press Enter button Use the or button to select an iconStill image Movie file Microsoft PowerPoint file Exiting the Viewer Index file extension.idxRemove the USB memory from the projector Operation for Drive list screen Using the Viewer Names and functions of Viewer screenDrive list screen Menu operation Functions Operation for Thumbnail screen Using the Viewer Thumbnail screen Using the Viewer Slide screen still image/movie Control bar operationFunctions of still image control bar Time Using the Viewer Functions of movie control barPLAY/PAUSE Play Pause Using the Viewer Viewer option settings Movie Repeat OFFONE Repeat Auto Play OFF Picture Date OLD Sort Name ABCName ZYX Date NEW Preparation Connecting the projector to the shared folderPress the Viewer button on the remote control ❹ Projecting data from shared folder Display the Shared Folder Setting screen Select a folder number and place to enable itDisplays the Options menu Exit the setting Disable the number of a shared folder you wish to disconnect ❺ Projecting data from media server Setting up Media Sharing in Windows Media Player Select Share my media check box, and then select OK Select P420 Series and then AllowSelect OK Select Automatically allow all computers and media devices Page Display the Media Server setting screen Disable the connectionDisplay the Options menu ❻ Restrictions on displaying files Some restrictions on PowerPoint files Changes are stored until adjusted again  Using the Menus Menu Elements Using On-Screen Menu List of Menu Items Orientation Menu Descriptions & Functions Source Menu Descriptions & Functions Adjust Picture PresetDicom SIM. Recommended for Dicom simulation format Adjusting Brightness and Contrast Dynamic Contrast Storing Your Customized Settings ReferenceSelecting Gamma Correction Mode Gamma Correction Adjusting Color Temperature Color Temperature Increases or decreases the color saturation level Adjusts the brightness level or the back raster intensityYes = Adjustable, No = Not adjustable Controls the detail of the image Image Options Adjusting Clock and Phase CLOCK/PHASEThis allows you to manually adjust Clock and Phase Use Phase only after the Clock is complete Selecting Overscan Percentage Overscan Select overscan percentage 0%, 5% and 10% for signal Using On-Screen Menu Selecting Aspect Ratio Aspect Ratio Computer signal Video signalP420X/P350X Turning Up or Down Sound Audio Saving Vertical Keystone Correction Keystone Save Menu Descriptions & Functions SetupGeneral Correcting Vertical Keystone Distortion Manually Keystone Setting Eco Mode ECO Mode Selecting Menu Color Color Select Using Off Timer OFF TimerSelecting Menu Language Language Menu Selecting a Color or Logo for Background Background Using On-Screen Menu Turning ON/OFF Control ID ID DisplayTurning On / Off Eco Message ECO Message Selecting Menu Display Time Display Time Enabling Security Security InstallationSelecting Projector Orientation Orientation Disabling the Cabinet Buttons Control Panel Lock Release the ID SET button Setting ID to the Projector Control IDPress the ID SET button on the remote control Turning On or Off Remote Sensor Remote Sensor OPTIONS1 Using On-Screen Menu Using Test Pattern Test PatternSetting Auto Adjust Auto Adjust Selecting Fan Mode FAN Mode Enabling Key Sound and Error Sound Beep Using On-Screen Menu Selecting Signal Format Signal SelectEnabling or Disabling Wxga Mode Wxga Mode Setting Hdmi Hdmi Settings Selecting Power-saving in Standby Mode Enabling Auto Power On Auto Power OnacOPTIONS2 Enabling Power Management Auto Power OFF Selecting Default Source Default Source Select100 4000 5000 Menu Descriptions & Functions Info101 Usage Time Source Wired LANWireless LAN 102 Others 103VERSION1 VERSION2 Clearing Lamp Hour Meter Clear Lamp Hours Menu Descriptions & Functions ResetReturning to Factory Default Reset 104 Desktop Control Utility ❾ Application Menu105 Image Express Utility 106 Network ProjectorRemote Desktop Connection To connect a Dhcp server To recall LAN settings stored in the profile numberTo set only for wireless LAN Network Type and WEP/WPA 107 Profiles 108 109 WEP 110Security WPA-PSK/WPA2-PSK/WPA-EAP/WPA2-EAP When WEP64bit or WEP128bit is selected for Security Type 111Maximum number of characters 112 Preparation before settingSetting Procedures Setting is required for using WPA-EAP or WPA2-EAP 113 EAP-TLS Select the Authentication tab114 ① Selecting EAP-TLS for EAP Type Select Client Certificate and press the Enter button Installing a digital certificateSelect Password field and press the Enter button 115 ② Selecting PEAP-MSCHAPv2 for EAP Type 116 117 To enter from KEY1 to KEY4, do the following 118 Mation in Applica Tion Menu 119PIN Type Push Button Type Set a host name and domain name of the projector Using On-Screen Menu Projector Name Advanced menu only120 Domain Advanced menu only Using On-Screen Menu Alert Mail Advanced menu only 121Sample of a message to be sent from the projector AMX Using On-Screen Menu Network Service Advanced menu only122 Http Server 123 Tools Administrator Mode 124 Setting a new program timerMake settings for each item as required Active Place a check mark to enable the program Advanced Settings 125Select Back and press the Enter button Changing the order of programs Using On-Screen Menu Activating the program timerChanging the programmed settings 126 Date Andtime 127  Setting Up the Screen and the Projector 128Selecting a Location 129 Installation and Connections Installation and Connections Throw Distance and Screen Size Distance Chart130 Reflecting the Image 131 Enabling the computer’s external display Connecting Your Computer Making Connections 132 133 Computer 1 Computer 2 HdmiUSB Display 134 Installation and Connections Connecting an External Monitor Connecting Video/S-Video Input 135Video Installation and Connections Connecting Component Input 136Computer 1 Computer 2 137 Installation and Connections Connecting Hdmi Input Example of LAN connection Installation and Connections Connecting to a Wired LANExample of wired LAN connection 138 139 Flow of Setting Wireless LAN 140 141 Prepare a Phillips screw driver beforehandPut the USB LAN port cover back into place Tighten the cable cover screws 142Attaching the cable cover Removing the cable cover Remove the four filters  Cleaning the Filters143 Remove the filter unit by pulling out the tab Remove dust from the filter unit and the filter cover MaintenanceUse a vacuum cleaner to vacuum all the dust inside 144 Clear the filter usage hours 145Put the filter unit back to the projector cabinet Put the filter cover back to the projector cabinet Cleaning the Lens Cleaning the Cabinet146 Replacing the Lamp and the Filters 147Flow of Replacing the Lamp and the Filters Remove the lamp cover Maintenance To replace the lampRemove the lamp housing 148 Install a new lamp housing 149Reattach the lamp cover Maintenance To replace the filters 150Before replacing the filters, replace the lamp. → 151 To clear the lamp usage hours and the filter usage hoursAttach four new filters to the filter unit Click OK  Installing Software ProgramInstallation for Windows software 152 Uninstalling a Software Program 153User Supportware User Supportware Installation for Macintosh software 154Image Express Utility 2 for Mac supports Mac OS Remote Control Window 155Control Functions 156 User Supportware Install Virtual Remote Tool on the computer Uninstalling Software Program 157Connect the projector to the computer 158 Start from the Start menuDouble-click the shortcut icon on the Windows Desktop 159 User Supportware Exiting Virtual Remote ToolViewing the help file of Virtual Remote Tool Image transmission Install Image Express Utility Lite on the computer160 What you can do with Image Express Utility Lite USB Display Click a software program on the menu window 161Connect the projector to a LAN Start Image Express Utility Lite 162 Viewing the Help of Image Express Utility LiteSelect the projector you wish to connect, and click Connect Click the Picture icon and then the button 163What you can do with GCT Projecting an Image from an Angle GCT 164 Click the X close button on the 4-point Correction windowClick the button on the control window to exit the GCT Simultaneous projection by multiple projectors Easy Connection function for connecting wireless LAN165 What you can do with Image Express Utility Projected images can be transferred and saved to computers Connecting the projector to a LANClick switching of presenter 166 Sending Images to Projector Connecting projector 167User Supportware Basic Operation of Image Express Utility 168 Transferring imagesCheck the projector to connect and click Connect Click Start Sending 169Click the projector icon on the Windows taskbar Click Stop Sending Click Select Folder 170User Supportware Holding Conferences Holding conferences Disclose a file to the participants of the conference Click Download 171Ending conference Participating in Conference Participating in conferences Click the Meeting Name to participate, and click Connect 172 Click Save Image in the attendant window 173User Supportware Saving received images Click Memo in the attendant window Select a file to download, and click Download 174User Supportware Downloading disclosed file Click File Transfer in the attendant window Click Become a Presenter in the attendant window 175User Supportware Changing presenter Leaving conference What you can do with Desktop Control Utility 176 Change Procedure For Windows 177For Windows Vista 178 User Supportware Operation on computerSelect the network device to use and click OK 179 Turn on the power to the projector 180Press the Source button on the projector unit Click Computer Search 181Click Desktop Control Utility Click Entry Operating the projector manipulating desktop screen 182 Operating the projector disconnecting communications 183Press the Exit button while the desktop screen is displayed Select an input source other than Network 184 185 Start PC Control Utility ProViewing the Help of PC Control Utility Pro 186 Converting PowerPoint files and saving them to a USB memory Remove the USB memory from the computer 187Click Export Click OK Click Exit 188 Select AirPort in Show Click AirPort tab 189Click Apple Menu and System Preferences Click Network 190 Click Tools on the menu bar, and click Stop Sending 191Restarting image transmission Exiting Image Express Utility 192  TroubleshootingIndicator Messages Over-Temperature Protection For more information contact your dealer Appendix Common Problems & Solutions→ Power/Status/Lamp Indicator on 193 194 Model Number P420X/P350X/P350W  Specifications195 Appendix 196 Power Saving  Cabinet Dimensions 197Unit mm inch 198 Pin Assignments of D-Sub Computer Input ConnectorMini D-Sub 15 Pin Connector Pin No RGB Signal Analog YCbCr Signal Component Compatible Input Signal List199 Analog RGB PC Control Codes PC Control Connector D-SUB 9PPC Control Codes and Cable Connection 200 Video and Audio Troubleshooting Check ListPower 201 Computer Signal cableInstallation environment 202 TravelCare a service for international travelers TravelCare Guide203 7N951552