NEC NP-P350X Compatible Input Signal List, Analog RGB, Component, Composite Video/S-Video, Hdmi

9. Appendix

5Compatible Input Signal List

Analog RGB

Signal	Resolution				Aspect Ratio	Refresh Rate
	( dots )					( Hz )
VGA	640	×	480		4:3	60/72/75/85/
						iMac
SVGA	800	×	600		4:3	56/60/72/75/85/
						iMac
XGA	1024	×	768	*1	4:3	60/70/75/85/
						iMac
XGA+	1152	×	864		4:3	60/70/75/85
WXGA	1280	×	768	*2	15:9	60
	1280	×	800	*2	16:10	60
	1360	×	768	*3	16:9	60
	1366	×	768	*3	16:9	60
Quad-VGA	1280	×	960		4:3	60/75
SXGA	1280	× 1024			5:4	60/75
SXGA+	1400	× 1050			4:3	60
WXGA+	1440	×	900		16:10	60
WXGA++	1600	×	900	*3	16:9	60
UXGA	1600	× 1200			4:3	60
WSXGA+	1680	× 1050			16:10	60
HD	1280	×	720		16:9	60
Full HD	1920	× 1080			16:9	60
MAC 13"	640	×	480		4:3	67
MAC 16"	832	×	624		4:3	75
MAC 19"	1024	×	768		4:3	75
MAC 21"	1152	×	870		4:3	75
MAC 23"	1280	× 1024			5:4	65

Component

Signal	Format			Aspect Ratio	Refresh Rate
					( Hz )
HDTV (1080p)	1920	×	1080	16:9	60
HDTV (1080i)	1920	×	1080	16:9	50/60
HDTV (720p)	1280	×	720	16:9	50/60
SDTV (480p)	720	×	480	4:3/16:9	60
SDTV (576p)	720	×	576	4:3/16:9	50
SDTV (480i)	720	×	480	4:3/16:9	60
SDTV (576i)	720	×	576	4:3/16:9	50

Composite Video/S-Video

Signal	Aspect Ratio	Refresh Rate
		( Hz )
NTSC	4:3	60
PAL	4:3	50
PAL60	4:3	60
SECAM	4:3	50

HDMI

Signal	Resolution				Aspect Ratio	Refresh Rate
	( dots )					( Hz )
VGA	640	×	480		4:3	60
SVGA	800	×	600		4:3	60
XGA	1024	×	768	*1	4:3	60
WXGA	1280	×	768	*2	15:9	60
	1280	×	800	*2	16:10	60
	1366	×	768		16:9	60
Quad-VGA	1280	×	960		4:3	60
SXGA	1280	× 1024			5:4	60
SXGA+	1400	× 1050			4:3	60
WXGA+	1440	×	900		16:10	60
WXGA++	1600	×	900		16:9	60
WSXGA+	1680	× 1050			16:10	60
HDTV (1080p)	1920	× 1080			16:9	50/60
HDTV (1080i)	1920	× 1080			16:9	50/60
HDTV (720p)	1280	×	720		16:9	50/60
SDTV (480p)	720	×	480		4:3/16:9	60
SDTV (576p)	720	×	576		4:3/16:9	50

*1 Native resolution on XGA model (P420X/P350X)

*2 Native resolution on WXGA model (P350W)

*3 The projector may fail to display these signals correctly when [AUTO] is selected for [ASPECT RATIO] in the on-screen menu.

The factory default is [AUTO] for [ASPECT RATIO]. To display these signals, select [16:9] for [ASPECT RATIO].

NOTE:

•An image with higher or lower resolution than the projector’s native resolution (P420X/P350X: 1024 × 768 / P350W: 1280 × 800) will be displayed with Advanced AccuBlend.

•Sync on Green and Composite sync signals are not supported.

•Signals other than those specified in the table above may not be displayed correctly. If this should happen, change the refresh rate or resolution on your PC. Refer to Display Properties help section of your PC for procedures.

199