NEC NP-P350W USE Digital CERTIFI- Cate, Projector Name, Host Name, Domain Name, Alert Mail, Save

3. Convenient Features

USE DIGITAL CERTIFI- CATE

Select this if you use a digital certificate for WPA-EAP TKIP PEAP-MSCHAP v2/WPA- EAP AES PEAP-MSCHAP v2/WPA2-EAP TKIP PEAP-MSCHAP v2/WPA2-EAP AES PEAP-MSCHAP v2.

• NAME

PROJECTOR NAME	Enter a name for your projector so that your computer can identify the projector. A
	projector name must be 16 characters or less.
	TIP: Projector name will not be affected even when [RESET] is done from the menu.
HOST NAME	Enter the hostname of the network connected to the projector. A host name must be
	15 or less.
DOMAIN NAME	Enter the domain name of the network connected to the projector. A domain name
	must be 60 characters or less.

• ALERT MAIL

ALERT MAIL	This option will notify your computer of lamp replace time or error messages via e-mail
	when using wireless or wired LAN.
	Placing a checkmark will turn on the Alert Mail feature.
	Clearing a checkmark will turn off the Alert Mail feature.
	Sample of a message to be sent from the projector:
	The lamp and filters are at the end of its usable life. Please replace the lamp and
	filters.
	Projector Name: NEC Projector
	Lamp Hours Used: 100 [H]
SENDER’S ADDRESS	Enter sender’s address.
SMTP SERVER NAME	Enter the SMTP server name to be connected to the projector.
RECIPIENT’S ADDRESS	Enter your recipient’s address. Up to three addresses can be entered.
1,2,3
TEST MAIL	Send a test mail to check whether your settings are correct or not
	NOTE:
	• If you execute a test, you may not receive an Alert mail. Should this happen, check if network
	settings are correct.
	• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this
	happen, check if the Recipient’s Address is correct.
SAVE	Click this button to save your settings to the projector’s memory.

41