131, Reflecting the Image | NEC NP-P350W, NP-P420X, NP-P350X

6. Installation and Connections

WARNING

*Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information.

*Do not attempt to install the projector yourself.

•Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely damaged.

•Do not use the projector where temperatures vary greatly. The projector must be used at temperatures between 41°F (5°C) and 104°F (40°C) (Eco mode se- lected automatically at 95°F to 104°F/35°C to 40°C).

•Do not expose the projector to moisture, dust, or smoke. This will harm the screen image.

•Ensure that you have adequate ventilation around your projector so heat can dissipate. Do not cover the vents on the side or the front of the projector.

Reflecting the Image

Using a mirror to reflect your projector’s image enables you to enjoy a much larger image when a smaller space is required. Contact your NEC dealer if you need a mirror system. If you’re using a mirror system and your image is inverted, use the MENU and  buttons on your projector cabinet or your remote control to correct the orientation. (→ page 95)

131

Image 149

NEC NP-P350W, NP-P420X, NP-P350X user manual 131, Reflecting the Image

Contents

Model No NP-P420X, NP-P350X, NP-P350W P420X/P350X/P350WPage Precautions Safety CautionsDOC Compliance Notice for Canada only Machine Noise Information Regulation 3. Gpsgv Installation Important SafeguardsImportant Information RF Interference for USA only Place the projector in a horizontal position Fire and Shock PrecautionsIii Remote Control Precautions Lamp Characteristic Lamp ReplacementAbout High Altitude mode About Copyright of original projected pictures Certificate marks and codes of the NP02LM Series English Important Information Information on Wireless LANNP02LM1 NP02LM2 Vii Product Name Supported countries and areas Viii Industry Canada Statement Important Information FCC ComplianceRegulatory Information/Disclaimers Regulatory Statement Contents of transmissions may be interceptedFrance Improper intrusions Compliant standards according to model NP02LM1 CCK / Dqpsk / Dbpsk / Ofdm / DS-SS NP02LM2 Xii Table of Contents Xiv Table of Contents VERSION2 OPTIONS1 OPTIONS2VERSION1 Xvi What’s in the Box? Introduction  Introduction to the Projector Features you’ll enjoyIntroduction Congratulations on Your Purchase of the Projector About this user’s manual Front/Top  Part Names of the Projector This security slot supports the MicroSaver Security System Introduction RearOpening and closing the lens cover Enter Button → Exit Button → Introduction Top Features → page 22 → page 33, 34 Introduction Terminal Panel Features → page 83  Part Names of the Remote ControlVOL. +- Button → Aspect Button FOCUS/ZOOM Button Not available on this series of projectors Operating Range for Wireless Remote Control Battery InstallationPress firmly and slide the battery Slip the cover back over the bat  Operating Environment for Software Included on CD-ROM Download service Introduction Operating Environment  Flow of Projecting an Image Connect the supplied power cord to the projector  Connecting Your Computer/Connecting the Power CordProjecting an Image Basic Operation Connect your computer to the projector Slide the lens cover to the left to uncover the lens  Turning on the Projector To select a menu language, follow these steps Selecting Default Source Using the Remote Control Selecting a Source Press the Menu button This chapter drawings and cables are omitted for clarity  Adjusting the Picture Size and Position P350W P420X/P350X Use the Focus lever to obtain the best focus FocusP420X/P350X P350W Projecting an Image Basic Operation Zoom Use the Zoom lever to adjust the image size on the screen Adjusting the left and right tilt of an image Rear foot Projecting an Image Basic Operation Adjust the Tilt FootLift the front edge of the projector Rotate the rear foot  Correcting Keystone Distortion Manually Adjusting with buttons on the cabinet Press the Exit button Press the Keystone buttonUse the  or  button to correct the keystone distortion  Turning Up or Down Volume  Optimizing Computer Signal AutomaticallyAdjusting the Image Using Auto Adjust Sound level from the speaker can be adjusted To turn off the projector  Turning off the Projector Preparation Make sure that the projector is turned off Unplug the power cord Disconnect any other cables After Use Freezing a Picture Turning off the Image and Sound Enlarging a Picture You can enlarge the picture up to four times To do so Press the D-ZOOM − button Convenient FeaturesPress the  button Checking Energy-Saving Effect Carbon Meter Press the  button to select on and press the Enter button To enable the Security functionPreventing the Unauthorized Use of the Projector Security Select YES and press the Enter button To turn on the projector when Security is enabledPress the Power button Type in your keyword and press the Enter button To disable the Security functionSelect OFF and press the Enter button Mouse R-CLICK Button works as the mouse right button Operating your computer’s mouse from the remote control Click Yes Use the USB cable to connect the computer with the projector Operate the control window Uses Update, Http Server*, Settings and InformationSelects an input source of the projector GCT functions Preparation before Use  Controlling the Projector by Using an Http BrowserOverview Projector Adjustment Displays how many hours the filter has been used Setting for Wired LAN Network SettingsSettings Wired or Wireless Ssid PasswordSite Survey Network Type Projector Name USE Digital CERTIFI- CateHost Name Domain Name Enable Http PasswordWired LAN Wireless LAN Operation Environment Setting the Projector to Network Projector Input ModeWindows 7/Windows Vista should be satisfied With the projector turned on, press the Source button From the Application Menu menu, select Network Projector Click P420 Series Click → Search for a projector recommended Exiting the Network Projector Operation Remote Desktop Checking the IP address on Windows Setting the Remote Access Click Details Starting the Remote Desktop Network menu will be displayed Convenient Features Exiting the Remote Desktop Supported graphic formats ❶ What you can do with the ViewerSupported movie files Playback requirements Supported PowerPoint files Using the ViewerSupported USB memory devices File name extension Supported file format UDP/TCP UDPTCP Save a file to your drive Using Print Command❷ Preparing presentation materials Press the Source button to select Viewer ❸ Projecting images stored in a USB memory deviceStarting the Viewer Still image Press the button to select USB1 and press Enter buttonUse the or button to select an icon Movie file Microsoft PowerPoint file Remove the USB memory from the projector Exiting the ViewerIndex file extension.idx Drive list screen Using the Viewer Names and functions of Viewer screenMenu operation Operation for Drive list screen Functions Operation for Thumbnail screen Using the Viewer Thumbnail screen Functions of still image control bar Using the Viewer Slide screen still image/movieControl bar operation PLAY/PAUSE Play Using the Viewer Functions of movie control barPause Time Using the Viewer Viewer option settings ONE Repeat Repeat OFFAuto Play OFF Picture Movie Name ZYX Sort Name ABCDate NEW Date OLD Press the Viewer button on the remote control Connecting the projector to the shared folder❹ Projecting data from shared folder Preparation Displays the Options menu Display the Shared Folder Setting screenSelect a folder number and place to enable it Exit the setting Disable the number of a shared folder you wish to disconnect ❺ Projecting data from media server Setting up Media Sharing in Windows Media Player Select OK Select Share my media check box, and then select OKSelect P420 Series and then Allow Select Automatically allow all computers and media devices Page Display the Options menu Display the Media Server setting screenDisable the connection ❻ Restrictions on displaying files Some restrictions on PowerPoint files Changes are stored until adjusted again  Using the Menus Menu Elements Using On-Screen Menu List of Menu Items Orientation Menu Descriptions & Functions Source Dicom SIM. Recommended for Dicom simulation format Menu Descriptions & Functions AdjustPicture Preset Selecting Gamma Correction Mode Gamma Correction Storing Your Customized Settings ReferenceAdjusting Color Temperature Color Temperature Adjusting Brightness and Contrast Dynamic Contrast Yes = Adjustable, No = Not adjustable Adjusts the brightness level or the back raster intensityControls the detail of the image Increases or decreases the color saturation level This allows you to manually adjust Clock and Phase Adjusting Clock and Phase CLOCK/PHASEUse Phase only after the Clock is complete Image Options Selecting Overscan Percentage Overscan Select overscan percentage 0%, 5% and 10% for signal Using On-Screen Menu Selecting Aspect Ratio Aspect Ratio P420X/P350X Computer signalVideo signal Turning Up or Down Sound Audio General Menu Descriptions & Functions SetupCorrecting Vertical Keystone Distortion Manually Keystone Saving Vertical Keystone Correction Keystone Save Setting Eco Mode ECO Mode Selecting Menu Language Language Using Off Timer OFF TimerMenu Selecting Menu Color Color Select Turning On / Off Eco Message ECO Message Using On-Screen Menu Turning ON/OFF Control ID ID DisplaySelecting Menu Display Time Display Time Selecting a Color or Logo for Background Background Selecting Projector Orientation Orientation InstallationDisabling the Cabinet Buttons Control Panel Lock Enabling Security Security Press the ID SET button on the remote control Setting ID to the Projector Control IDTurning On or Off Remote Sensor Remote Sensor Release the ID SET button Setting Auto Adjust Auto Adjust Using On-Screen Menu Using Test Pattern Test PatternSelecting Fan Mode FAN Mode OPTIONS1 Enabling or Disabling Wxga Mode Wxga Mode Using On-Screen Menu Selecting Signal Format Signal SelectSetting Hdmi Hdmi Settings Enabling Key Sound and Error Sound Beep OPTIONS2 Selecting Power-saving in Standby ModeEnabling Auto Power On Auto Power Onac 100 Enabling Power Management Auto Power OFFSelecting Default Source Default Source Select 101 Menu Descriptions & Functions InfoUsage Time 4000 5000 Wireless LAN Wired LAN102 Source VERSION1 103VERSION2 Others Returning to Factory Default Reset Menu Descriptions & Functions Reset104 Clearing Lamp Hour Meter Clear Lamp Hours 105 ❾ Application MenuImage Express Utility Desktop Control Utility Remote Desktop Connection 106Network Projector To set only for wireless LAN Network Type and WEP/WPA To recall LAN settings stored in the profile number107 To connect a Dhcp server Profiles 108 109 Security 110WPA-PSK/WPA2-PSK/WPA-EAP/WPA2-EAP WEP Maximum number of characters When WEP64bit or WEP128bit is selected for Security Type111 Setting Procedures Preparation before settingSetting is required for using WPA-EAP or WPA2-EAP 112 113 114 Select the Authentication tab① Selecting EAP-TLS for EAP Type EAP-TLS Select Password field and press the Enter button Installing a digital certificate115 Select Client Certificate and press the Enter button ② Selecting PEAP-MSCHAPv2 for EAP Type 116 117 To enter from KEY1 to KEY4, do the following 118 PIN Type 119Push Button Type Mation in Applica Tion Menu 120 Using On-Screen Menu Projector Name Advanced menu onlyDomain Advanced menu only Set a host name and domain name of the projector Sample of a message to be sent from the projector Using On-Screen Menu Alert Mail Advanced menu only121 122 Using On-Screen Menu Network Service Advanced menu onlyHttp Server AMX 123 Tools Administrator Mode Make settings for each item as required Setting a new program timerActive Place a check mark to enable the program 124 Select Back and press the Enter button Advanced Settings125 Changing the programmed settings Using On-Screen Menu Activating the program timer126 Changing the order of programs Date Andtime 127 Selecting a Location  Setting Up the Screen and the Projector128 129 Installation and Connections 130 Installation and Connections Throw Distance and Screen SizeDistance Chart Reflecting the Image 131  Making Connections Connecting Your Computer132 Enabling the computer’s external display USB Display 133Computer 1 Computer 2 Hdmi 134 Installation and Connections Connecting an External Monitor Video Connecting Video/S-Video Input135 Computer 1 Computer 2 Installation and Connections Connecting Component Input136 137 Installation and Connections Connecting Hdmi Input Example of wired LAN connection Installation and Connections Connecting to a Wired LAN138 Example of LAN connection 139 Flow of Setting Wireless LAN 140 Put the USB LAN port cover back into place 141Prepare a Phillips screw driver beforehand Attaching the cable cover 142Removing the cable cover Tighten the cable cover screws 143  Cleaning the FiltersRemove the filter unit by pulling out the tab Remove the four filters Use a vacuum cleaner to vacuum all the dust inside Maintenance144 Remove dust from the filter unit and the filter cover Put the filter unit back to the projector cabinet 145Put the filter cover back to the projector cabinet Clear the filter usage hours 146 Cleaning the LensCleaning the Cabinet Flow of Replacing the Lamp and the Filters Replacing the Lamp and the Filters147 Remove the lamp housing Maintenance To replace the lamp148 Remove the lamp cover Reattach the lamp cover Install a new lamp housing149 Before replacing the filters, replace the lamp. → Maintenance To replace the filters150 Attach four new filters to the filter unit 151To clear the lamp usage hours and the filter usage hours Installation for Windows software  Installing Software Program152 Click OK User Supportware Uninstalling a Software Program153 Image Express Utility 2 for Mac supports Mac OS User Supportware Installation for Macintosh software154 Control Functions Remote Control Window155 156 User Supportware Install Virtual Remote Tool on the computer Connect the projector to the computer Uninstalling Software Program157 Double-click the shortcut icon on the Windows Desktop 158Start from the Start menu Viewing the help file of Virtual Remote Tool 159User Supportware Exiting Virtual Remote Tool 160 Install Image Express Utility Lite on the computerWhat you can do with Image Express Utility Lite USB Display Image transmission Connect the projector to a LAN 161Start Image Express Utility Lite Click a software program on the menu window Select the projector you wish to connect, and click Connect 162Viewing the Help of Image Express Utility Lite What you can do with GCT 163Projecting an Image from an Angle GCT Click the Picture icon and then the button Click the button on the control window to exit the GCT 164Click the X close button on the 4-point Correction window 165 Easy Connection function for connecting wireless LANWhat you can do with Image Express Utility Simultaneous projection by multiple projectors Click switching of presenter Connecting the projector to a LAN166 Projected images can be transferred and saved to computers User Supportware Basic Operation of Image Express Utility Sending Images to Projector Connecting projector167 Check the projector to connect and click Connect 168Transferring images Click the projector icon on the Windows taskbar 169Click Stop Sending Click Start Sending User Supportware Holding Conferences Holding conferences 170Disclose a file to the participants of the conference Click Select Folder Ending conference 171Participating in Conference Participating in conferences Click Download Click the Meeting Name to participate, and click Connect 172 User Supportware Saving received images 173Click Memo in the attendant window Click Save Image in the attendant window User Supportware Downloading disclosed file 174Click File Transfer in the attendant window Select a file to download, and click Download User Supportware Changing presenter 175Leaving conference Click Become a Presenter in the attendant window What you can do with Desktop Control Utility 176 For Windows Vista Change Procedure For Windows177 Select the network device to use and click OK 178User Supportware Operation on computer 179 Press the Source button on the projector unit Turn on the power to the projector180 Click Desktop Control Utility 181Click Entry Click Computer Search Operating the projector manipulating desktop screen 182 Press the Exit button while the desktop screen is displayed Operating the projector disconnecting communications183 Select an input source other than Network 184 Viewing the Help of PC Control Utility Pro 185Start PC Control Utility Pro 186 Converting PowerPoint files and saving them to a USB memory Click Export 187Click OK Click Exit Remove the USB memory from the computer 188 Click Apple Menu and System Preferences 189Click Network Select AirPort in Show Click AirPort tab 190 Restarting image transmission 191Exiting Image Express Utility Click Tools on the menu bar, and click Stop Sending Indicator Messages  TroubleshootingOver-Temperature Protection 192 → Power/Status/Lamp Indicator on Appendix Common Problems & Solutions193 For more information contact your dealer 194 195  SpecificationsAppendix Model Number P420X/P350X/P350W 196 Power Saving Unit mm inch  Cabinet Dimensions197 Mini D-Sub 15 Pin Connector Pin Assignments of D-Sub Computer Input ConnectorPin No RGB Signal Analog YCbCr Signal 198 199 Compatible Input Signal ListAnalog RGB Component PC Control Codes and Cable Connection PC Control Connector D-SUB 9P200 PC Control Codes Power Troubleshooting Check List201 Video and Audio Installation environment Signal cable202 Computer 203 TravelCare a service for international travelersTravelCare Guide 7N951552