NEC NP-P350X, NP-P420X Convenient Features, Press the  button, Press the D-ZOOM − button

3. Convenient Features

2.Press the  button.

The area of the magnified image will be moved

3. Press the D-ZOOM (−) button.

Each time the D-ZOOM (−) button is pressed, the image is reduced.

NOTE:

• The image will be enlarged or reduced at the center of the screen.

• Displaying the menu will cancel the current magnification.

Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [ECO MODE]

The ECO MODE (ECO1 and ECO2) increases lamp life, while lowering power consumption and cutting down on CO2 emissions.

Four brightness modes of the lamp can be selected: [OFF], [AUTO ECO], [ECO1] and [ECO2] modes.

[ECO MODE]	Description	Status of LAMP indicator
[OFF]	This is the default setting (100% Brightness).	Off
[AUTO ECO]	Lamp power consumption will be changed between	Steady Green
	[OFF] and [ECO1] automatically according to picture	light
	level
	NOTE: A bright gradation may be less visible depending
	on the image.
[ECO1]	Low lamp power consumption (approx. 75% Bright-
	ness).
[ECO2] (P350X	Lower lamp power consumption than [ECO1] mode
only)	(approx. 60% Brightness)

To turn on the [ECO MODE], do the following:

1.Press the ECO Button on the remote control to display [ECO MODE] screen.

2.Press the ECO button again to select a mode you wish.

•Each time the ECO button is pressed, the choices will be changed:

OFF → AUTO ECO → ECO1 (→ ECO2) → OFF

•When the projector is in ECO mode, the LAMP indicator will light green.

TIP:

• The leaf symbol at the bottom of the menu shows the current selection of ECO mode.

28