26

4.3Motion

1

2

3

4 5 6 7

8

9

10

11

Figure 4.3

1Select Camera – Selects the current camera to be edited.

2Sensitivity – Adjusts the sensitivity within the designated Motion Areas.

3Clear – Clears all Motion Areas for the selected camera.

4Regular Interval Recording – This option allows you to record a single frame every few minutes or every few hours to show that the DVR is still functioning even when motion is not taking place. This option only works when Motion recording or Sensor recording is selected.

5Full Screen Pop-Up on Sensor – When Sensor (alarm input) is detected, the camera will display full screen. The video will not atomically return to normal view. This option will require a user reset the screen to normal view.

6Beep on Detect – When motion is detected, an internal speaker on the DVR will sound an alarm.

7Full Screen Pop-Up– When Motion is detected, the camera is displayed full screen. The video will not atomically return to normal view. This option will require a user reset the screen to normal view .

8Alarm Output – Allows you to activate a specified control output when Motion is detected.

9Post Alarm (SENSOR) – Allows you to record video after a Sensor event has ceased for a specified period of time. This option will only work for cameras set to record from a Sensor Event.