Hitachi CDR-8130 PRECAUTIONS FOR SAFETY Power source, In case of failure, Important Safeguards

Models: CDR-8130

1 13
Download 13 pages 799 b
Page 4
Image 4
IMPORTANT SAFEGUARDS

IMPORTANT SAFEGUARDS

SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR EQUIPMENT

READ ALL INSTRUCTIONS.

SAVE THESE INSTRUCTIONS FOR LATER USE.

FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE PRODUCT.

PRECAUTIONS FOR SAFETY

Power source

-This CD-ROM Drive should be operated from the type of power source indicated on the marked label. (+12V DC / +5V DC)

To avoid the risk of electric short circuits or damage to your CD-ROM drive

-Do not expose your CD-ROM Drive to rain or moisture.

-Do not open or remove the cover of your CD-ROM Drive. It may cause personal injury by rapid rotating disc.

-Turn off your SYSTEM and unplug the power supply cable of your SYSTEM from the wall outlet before installing your CD-ROM Drive, interface card or connecting cables.

-Do not allow liquids and foreign objects to get in .

-Do not place heavy loads on the CD-ROM Drive.

-Do not use this CD-ROM Drive without mounting it.

-Firmly attach the DC power supply cable, connecting cables between the CD-ROM Drive and other devices and keep them connected securely.

In case of failure

In case of the following conditions, turn off the SYSTEM including the CD-ROM Drive and unplug the power supply cable of the SYSTEM from the wall outlet immediately.

Do not attempt to service the CD-ROM Drive yourself and refer servicing to qualified service personnel immediately.

-If objects of any kind have been entered into your CD-ROM Drive

-If liquid has been spilled into your CD-ROM Drive

-If your CD-ROM Drive has been exposed to rain or water

-If your CD-ROM Drive does not operate normally when the operating instructions are followed

-If your CD-ROM Drive has been dropped or your CD-ROM Drive has been damaged

-If your CD-ROM Drive exhibits a distinct change in performance

PRECAUTIONS FOR USE

Installation conditions

Do not install your CD-ROM Drive under the following conditions. It may lead to trouble or affect performance by dust on the pick-up lens and the disc, by heat or vibration.

4

Page 4
Image 4
Hitachi CDR-8130 PRECAUTIONS FOR SAFETY Power source, In case of failure, PRECAUTIONS FOR USE Installation conditions