![SOFTWARE INSTALLATION](/images/new-backgrounds/18667/1866715x1.webp)
Install the
1.Check the Device Configuration Jumper settings of the
2.Turn off the host computer and unplug the power supply cable of the host computer.
3.Remove the host computer cover.
4.Install the
5.Check the settings of the interface card.
6.Install the interface card in the slot.
7.Firmly attach the interface cable from the interface card to the
8.Firmly attach Audio connecting cable as required.
9.Finally attach a spare DC power supply cable from the computer power supply to the
10.Install the host computer cover.
Power supply cable
Interface cable
Audio connecting cable
SOFTWARE INSTALLATION
To install
Drive, refer to the instruction manual of each
DRIVE OPERATION
1.Turn on the SYSTEM including the
2.Press the OPEN/CLOSE button of the
3.Place the disc in the center of the Disc Tray with label side up as shown below.
4.To close the Disc Tray, press the OPEN/CLOSE button on the
5.Operate referring to the instruction manual of
8