Hitachi CDR-8130 instruction manual A Hole, Mechanical Dimensions

Symptoms	Possible causes	Remedy
The CD-ROM	1.You place the disc up-side	1.Place the disc right side up in the
Drive does not	down in the Disc Tray.	Disc Tray, then load it.
operate even when	2. The disc is dirty.	2.Clean the disc surface.(See page 4)
a disc is loaded.	3. The pick-up lens is	3.Clean up the pick-up lens.(See page
	dirty.	10)
	4.The disc is scratched or	4.Change the disc.
	warped.	5.Turn off your SYSTEM and re-
	5.Cable connection is	connect cables correctly.
	incorrect.
The Disc Tray can	The program is incorrect. It	Check the program. Check the
not beopened.	is locked by the program.	program.
Communications	There are devices with the	Give each device a different Device
between the host	same Device Configuration	Configuration Jumper setting.
computer and the	jumper setting on the
devices on the	interface cable.
interface cable can
not be done.

MECHANICAL DIMENSIONS
		42.7		(A) Hole
				5 (max) Surface of
130.0
				the CD-ROM DRIVE
149.3
				Mounting Screw
		5		M3X0.5
		Å}0.5	12-M3	Mounting frame of
				the host computer
(A)	(A)	47.5	(Depth
		(A)(A)	: Max. 5)
			(A : Hole)
		79.3Å}0.5
190	(A)
(A)		(A)(A)
			10+/- 0.5
139.8+/- 0.5			21.8+/- 0.5
146		41.3
		(32.5)		Dimensions (unit : mm)

11