Hitachi CDR-8130 Controls And Functions, Front Panel, LOADING/UNLOADING/BUSY Indicator, Disc Tray

CONTROLS AND FUNCTIONS

Front Panel Rear Panel

(6)(2)

					39		1
					40		2
(3)	(4)	(1)	(5)	(7)	(8)	(9)	(10)

(1) LOADING/UNLOADING/BUSY Indicator

Indicator blinks green only when the Disc Tray is being opened or closed, or when the CD-ROM drive is accessing data.

(2) Disc Tray

When the power of the CD-ROM Drive is turned off, the Disc Tray can not be opened and closed.

(3)Headphone Jack (3.5 mm)

(4)Headphone Volume Control Adjust the headphone volume.

(5)OPEN/CLOSE Button

Press this button to open or close the Disc Tray.

(6)Manual Emergency Eject Hole Only in case of emergency:

If the Disc Tray does not open when the OPEN/CLOSE Button is pressed, the CD-ROM Drive's Manual Emergency Eject mechanism may be activated.

This should be used only in case of emergency.

See Page 9 about Manual Emergency Eject Procedure.

(7)Audio Output Terminal

Lch

GND

Rch

(8) Device Configuration Jumper

This Connector is used to set operation modes such as Master, Slave and CSEL

6