65
6.3PTZ Setup
The PTZ Setup allows you to enable PTZ cameras, create Presets, Tours, and also adjust speed settings. Many options listed here are features only available on selected cameras.
1 | 2 | 3 | 4 | 5 | 6 | 7 |
8 10 | 12 | 13 | Figure 6.3 |
9 11 |
| PTZ Setup | |
|
| ||
|
|
|
Figure 6.3
1RS485 / RS232 – Defines how to send the PTZ signal to the camera.
2Select Camera – Selects the current camera to be edited.
3Protocol – Selects the protocol to use for the selected camera. The protocol is the unique set of instructions that allows the DVR to communicate with the PTZ camera.
4Enable Pan/Tilt – Enables the DVR to control the PTZ camera.
5Open PTZ Controller – This option opens the PTZ controller allowing you to move the PTZ camera.
6On Screen Compass – This option allows
7Preset and Tour – These options allow you to create Presets and Tours for the PTZ camera. Since each camera creates these in a different way, there can be multiple ways to do this.
8Pan Speed – This option increases or decreases the Pan speed.