BP7360 JULIANNE 9/19/07 11:15 AM Page 3
This Manual Is Designed to Make it as Easy as Possible for You to
Assemble, Install, Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
One Phillips head screwdriver One wire stripper
One stepladder
Seven wire connectors (supplied) Three
bulbs
Materials
Wiring, outlet box and box connectors must be of type required by the local code. The minimum wire would be a
Installed Wire Length | Wire Size A.W.G. |
Up to 50 ft. | 14 |
| 12 |
!WARNING
Before assembling your ceiling fan, refer to section on proper method of wiring your fan (page 11). If you feel you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician.
Unpacking Instructions
For your convenience,
!WARNING
Do not install or use fan if any part is damaged or missing. Call
!WARNING
This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.
1. Open styrofoam unit containing fan. Remove top half of styrofoam unit. Remove parts and check to see that you have received the following parts:
NOTE: If you are uncertain of part description, refer to exploded view illustration.
a.Fan motor and housing assembly
b.One coupling cover
c.One ceiling cover
d.Five blade flanges
e.Five fan blades
f.One switch cup assembly
g.One hanger bracket
h.One hanger ball/downrod (18”) assembly
i.One 6” downrod
j.One lower glass
k.One decorative ring/light fitter assembly
l.One decorative cap
m.One finial nut
n.Three downrod scrolls
o.One scroll collar assembly
p.One Fan/Light Wall Control (transmitter and receiver)
3 | U.L. Model No.: CF220 |