TOSHIBA AT200
Charging the battery
When the battery power becomes low, you must recharge it to avoid losing any data.
Procedure
To recharge the battery, connect the AC adaptor to the tablet. The tablet will be powered up automatically and the multi function LED indicator (when set as Power/battery indicator) will glow white while the battery is being charged.
Charging time
The following table shows the approximate time required to fully charge a discharged battery when the AC adaptor is connected to the tablet.
Battery type | Charging time |
Battery (3 cell, 25.75Wh) | about 6 hours |
|
|
Please be aware that the charging time when the tablet is on is affected by ambient temperature, the temperature of the tablet and how you are using the tablet - if you make heavy use of external devices for example, the battery might scarcely charge at all during operation.
Battery exhausted time
The following table shows the approximate exhausted time of a fully charged battery.
Battery type | Time |
Battery (3 cell, 25.75Wh) | about 8 hours (in use) |
| about 5 days (sleep mode) |
|
|
Please be aware that the battery exhausted time will be affected by how you are using the tablet.
Battery charging notice
The battery may not begin charging immediately under the following conditions:
The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all). To ensure the battery charges to its full capacity, you should charge it at room temperature of between 5°C to 35°C (41°F to 95°F).
User's Manual |
