TOSHIBA AT200
Check all cables to ensure they are correctly and firmly attached to the tablet - loose cables can cause signal errors.
Inspect all connecting cables for loose wires and all connectors for loose pins.
Always try to make detailed notes of your observations and keep them in a permanent error log - this will help you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made will help to identify the problem faster.
Hardware and system checklist
This section discusses problems caused by your tablet’s hardware or attached peripherals. Basic problems may occur in the following areas:
Internal display panel | External monitor |
Memory Media Card | USB device |
Wireless LAN | Bluetooth |
Sound system |
|
Internal display panel
Apparent tablet's display panel problems may be related to the tablet's setup and configuration.
Problem | Procedure |
Markings appear on | These marks may have come from contact with the |
the tablet's display | keyboard and Touch Pad while the display panel |
panel. | has been closed. You should try to remove the |
| marks by gently wiping the display panel with a |
| clean dry cloth or, if this fails, with a good quality |
| LCD screen cleaner. In this latter instance you |
| should always follow the instructions with the |
| screen cleaner and always ensure you let the |
| display panel dry properly before closing it. |
|
|
Problems above | You should initially refer to the documentation |
remain unresolved | supplied with you software to determine if it is this |
or other problems | that is causing the problems. |
occur | If you are still unable to resolve the problem, |
| |
| contact your reseller, dealer or service provider. |
|
|
User's Manual |
