Toshiba AT200 Using this equipment in Japan, Important notice, Indication for Wireless LAN

TOSHIBA AT200

Using this equipment in Japan

In Japan, the frequency bandwidth of 2,400MHz to 2,483.5MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power radio station).

1. Important notice

The frequency bandwidth of this equipment may operate within the same range as industrial devices, scientific devices, medical devices, microwave ovens, licensed radio stations and non-licensed specified low-power radio stations for mobile object identification systems (RFID) used in factory production lines (Other Radio Stations).

1.Before using this equipment, ensure that it does not interfere with any of the equipment listed above.

2.If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions.

3.Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.

2. Indication for Wireless LAN

The indication shown below appears on this equipment.

1.2.4 : This equipment uses a frequency of 2.4GHz.

2.DS : This equipment uses DS-SS modulation.

3.OF : This equipment uses OFDM modulation.

4.4 : The interference range of this equipment is less than 40m.

5. : This equipment uses a frequency bandwidth from 2,400MHz to 2,483.5MHz. It is possible to avoid the band of mobile object identification systems.

3. Indication for Bluetooth

The indication shown below appears on this equipment.

1.2.4 : This equipment uses a frequency of 2.4 GHz.

2.FH : This equipment uses FH-SS modulation.

3.1 : The interference range of this equipment is less than 10 m.

User's Manual 10-6