TOSHIBA AT300SE series
2.Plug the other smaller connector of the USB cable into the Micro USB port on your tablet.
Figure 3-4 Connecting the AC adaptor 2
3.Plug the AC adaptor into a live wall outlet.
Wall outlet
The fastest way to charge your tablet is with the included AC adaptor plugged into a wall outlet.
USB charge
In “suspend or shutdown mode,” you can also charge your tablet, although more slowly, by connecting the USB cable to the USB port on your PC. Please make sure your PC is turned ON while charging via USB. If your PC is turned OFF, depending on PC specifications, the tablet battery may discharge. We recommend that you do not use your tablet while charging via USB as auto shutdown may occur if the battery charge is too low.
Turning on the power
This section describes how to power up your tablet.
Press & hold Power button for two seconds and the LED indicator will glow white for two seconds to indicate that the tablet is on.
Figure 3-5 Turn on the tablet
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the power. Setup your tablet according to the following steps:
1.Choose your preferred system language and tap Start to start the initial setup process.
2.Connect to a
You can tap Skip and turn
User's Manual |
