INSTALLATION
Choosing an installation location
Install your washing machine in a level, stable place.
•It is dangerous to place the washing machine in an unstable location since it may move during vibration.
•It will increase the sound produced by the machine when it vibrates during use.
When you move washing machine, hold the handles on the sides.
There are moving parts, electrical parts and steel plates which may cause electrical shock or injury.
•Never touch on the cabinet bottom by hands. Never lift at the cabinet bottom by hands.
When the machine is covered.
Do not use the cover made of chloric vinyl. Sometimes it damages resinous parts and painted surface. When you use the cover made of chloric vinyl, put the cloth between the machine and the cover.
Avoid place where the machine is exposed to direct sunlight.
•Plastic parts may become deformed or discolored.
Avoid places where the machine may become frozen during cold weather.
Allow a space of at least 5 cm from the sides and rear of the machine to the nearest vertical object.
•When placed too near to walls or other objects, the vibration of the machine during operation may cause them to shake.
Allow 5 cm
Installation
Adjust the legs so that the body of your washing machine is level (The two legs are adjustable).
After loosening the adjusting | When the leg height is difficult to | A weight attached to a string may be used | |
1 nut, adjust the leg to the proper | 2 adjust because of floor slope or | 3 to check to ensure that your washing | |
height by turning it. Then | unevenness, place a board of | machine is level. The distance is less | |
tighten | the adjusting nut | sufficient thickness to prevent | than 1 cm between A and B. |
securely once again. | breakage under the affected legs |
| |
|
| to allow adjustment to a level |
|
| Leg nut | position. |
|
Loosen | Tighten |
|
|
|
|
| String |
| Leg |
|
|
Raise | Lower |
|
|
Check the distance
Installing the ground pin
•The ground pin in the plug should be connected to the proper point of the socket for grounding.
14
14 | 10/11/06, 8:53 |
