18
BEFORE CALLING THE SERVICEMAN
WHEN CHECK TREATMENT
does not operate
making noise
water leak
does not beep the
end buzzer
Please confirm whether a power failure or fuse
breaker is cut. Then draw out power supply
plug, insert once again and turn the power
switch on.
Please correct the inclination or non stability
of laundry in the washing machine.
Remove them.
Remove the center screw, lift the pulsator out
and remove the foreign object.
Water intake valve buzzes.
Adjust the inside ring of the hose union or
change faucet shape (Refer to p.16)
Re-attaching the water (Refer to p.16)
Re-attaching the water supply hose (Refer to
p.16)
Reset the end buzzer sound to turn on refer-
ring to "If you wish to turn off the end buzzer
sound. (p. 4)"
Error Indication List
In the case the buzzer sounds and the display indicates as shown below.
WHEN CHECK TREATMENT
•Is the drainage hose
properly connected to the
machine?
•Is the drainage hose
bent?
•Is the drainage hose laid
down?
•Is the drain water frozen?
•Is the outlet of the drain-
age hose sunk in water?
•Is the drainage hose
clogged?
•Is there not the inclination
of the laundry?
•Is your washing machine
installed on an incline or
uneven surface?
•Is the water faucet turned
on?
•Is the water supply frozen
or shut?
•Is the inlet net of the
water intake valve choked
with dust?
•Is the lid opened?
•Pull out power supply
plug, and call serviceman
for repair.
Open and close the
lid once and then
press the START
button.
Please repair the
inclination of a
washing machine
and non stability of
a washing machine.
Then close the lid.
Open and close the
lid once and then
press the START
button.
Close the lid.
WHEN CHECK TREATMENT
• Is there a power outage?
•Is the circuit breaker or fuses cut off?
•Is the machine’s plug properly inserted into
an AC socket?
•Is the power switch ON?
•Is there the inclination of the laundry?
•Is your washing machine installed on an
inclined or uneven surface?
•Are there match sticks, hairpins or metal
objects being washed with the laundry?
•Is there a foreign object caught under the
pulsator?
•Groan sounds during water supply.
•Is the faucet shape suited?
•Are the hose coupling and the nozzle loose?
•Is the water inlet nut loose?
•Is the water supply hose connector clogged?
•If you turn the power on and press START
pad immediately, it may not beep the end
buzzer.
•Is the end buzzer turned off?