2. PRINTER SETUP
ENGLISH VERSION
2.7Loading the Ribbon
2.7Loading the Ribbon The printer automatically detects if a ribbon is installed after power on and will switch to thermal transfer or direct thermal printing mode. If the
printer does not detect a ribbon (direct thermal mode), the motor that drives the ribbon spindles will be turned off. Make sure both the ribbon access cover and the printer top cover are closed when powering the printer up.
1.Push down on the ribbon access cover to unlock and open the cover
2.Place a paper core on a ribbon rewind spindle.
3.Mount the ribbon rewind paper core on the front hubs.
4.Install a ribbon on the ribbon supply spindle.
5.Mount the ribbon supply spindle on the rear hubs.
6.Attach the ribbon leader to the ribbon rewind paper core.
7.Rotate the ribbon rewind paper core until the ribbon leader is thoroughly, firmly encompassed by the black section of the ribbon.
8.Close the ribbon access cover.
Ribbon Access Cover
Paper Core
Ribbon Spindle
Back Hub
Front Hub
E2- 9
