Toshiba D-R400 owner manual Functional Overview, Front Panel, Rear Panel

FUNCTIONAL OVERVIEW

Front Panel

1 2 3* 4 5 6 7 8

Introduction

I/yON/STANDBY DVD -RW/R +RW/R RECORDING OPEN/CLOSE

(*) The unit can also be turned on by pressing these buttons.

1.I/y ON/STANDBY button Press to turn the unit on and off.

If timer programmings have been set, press to set the unit in timer-standby mode.

2.Disc tray

Place a disc when the disc tray is opened.

3.A OPEN/CLOSE button*

Press to open or close the disc tray.

4.Infrared sensor window

Receive signals from your remote control so that you can control the unit from a distance.

5. H (SKIP) button

During playback, press once midway through a chapter or track to go back to the beginning of the current chapter or track. When pressed twice in quick succession, playback will start from the preceding chapter or track.

During playback, press and hold for 1.5 seconds to fast reverse.

When playback is paused, press to play back reverse step by step.

When playback is paused, press and hold for 1.5 seconds to slow reverse.

6. G (SKIP) button

During playback, press to skip to the next chapter or track. During playback, press and hold for 1.5 seconds to fast forward.

1080p 1080i 720p 480p

SKIP STOP PLAY REC

L2

S-VIDEO VIDEO L R DV IN

15 14* 13

12 11 10 9

When playback is paused, press to play back advance step by step.

When playback is paused, press and hold for 1.5 seconds to slow foward.

7.Display

Refer to “FRONT PANEL DISPLAY GUIDE” on page 17.

8.HDMI indicator

Lights up and indicates the HDMI output mode when HDMI output is on.

9.DV IN jack (L3)

Use to connect the DV output of external device with a DV cable.

10.AUDIO input jacks (L2)

Use to connect external device with a RCA audio cable.

11.VIDEO input jack (L2)

Use to connect external device with a RCA video cable.

12.S-VIDEO input jack (L2)

Use to connect the S-video output of external device with an S-video cable.

13.I REC button

Press once to start a recording. Press repeatedly to start one-touch timer recording.

14.B PLAY button*

Press to start or resume playback.

15.C STOP button

Press to stop playback or recording.

Connections
Basic Setup
Management	Disc
Recording

Rear Panel

1 2 3 4

VIDEO VIDEO
	IN	OUT		Y
L			L			HDMI OUT
				PB/CB
R		IN	R	PR/CR	OUT	COAXIAL
AUDIO IN	S-VIDEO		AUDIO OUT	COMPONENT	S-VIDEO	DIGITAL AUDIO OUTPUT
(L1)				VIDEO OUT		PCM / BITSTREAM

10 9 8 7 6

1.VIDEO IN jack (L1)

Use to connect external device with a RCA video cable.

2.VIDEO OUT jack

Use to connect a TV monitor, AV receiver or other device with a RCA video cable.

3.COMPONENT VIDEO OUTPUT jacks

Use to connect a TV monitor with component video inputs with a component video cable.

4.HDMI OUT jack

Use an HDMI cable to connect to a display with an HDMI compatible port.

5.AC Power Cord

Connect to a standard AC outlet to supply power to this unit.

6.COAXIAL DIGITAL AUDIO OUTPUT jack

Use to connect an AV receiver, Dolby Digital decoder, DTS decoder or other device with a digital audio coaxial input jack with a digital audio coaxial cable.

5

7.S-VIDEO OUT jack

Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable.

8.AUDIO OUT jacks

Use to connect a TV monitor, AV receiver or other device with a RCA audio cable.

9.S-VIDEO IN jack (L1)

Use to connect the S-video output of external device with an S-video cable.

10.AUDIO IN jacks (L1)

Use to connect external device with a RCA audio cable.

Note

•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

Playback

Editing Function Setup Others

EN 11

E7E7AUD_EN.indb 11 2007/01/29 19:03:43