Toshiba D-R400 owner manual Video cont’d, Progressive Default OFF, TV Aspect Default 43 Letter Box

GENERAL SETTING

Video (cont’d)

1 Progressive (Default : OFF)

This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.

1) Use [K / L] to select “ON“, then press [ENTER].

General Setting
Playback
Display	Progressive
Video	TV Aspect
Recording	Progressive
	Select Video
Clock	ON
	OFF
DivX
HDMI
Reset All

2) Use [{ / B] to select “Yes“, then press [ENTER].

General Setting

Playback				scan:
Activating progressive
Display				Progressive
Check your	TV has		progressive scan
Video				TV Aspect
and connect	withProgressivecomponent video cable.
Rcording				Select Video
Clock		ON
		OFF
DivX
NOTE :
HDMI If there is no picture or picture is
Reset All
distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate? Yes No

2 TV Aspect (Default: 4:3 Letter Box)

You can select the TV aspect ratio to match the formats of what you are playing back with the unit and your TV screen (4:3 standard or 16:9 widescreen TV).

Use [K / L] to select a desired option, then press [ENTER].

General Setting
Playback
Display	Progressive
Video	TV Aspect TV Aspect
Recording	Select Video
Clock	4:3 Letter Box
	4:3 Pan & Scan
DivX
	16:9 Wide
HDMI
Reset All

If you have a standard TV:

Select “4:3 Letter Box”, so that black bars appear on the top and bottom of the TV screen when playing back a wide-screen picture. Select “4:3 Pan & Scan” for a full height picture with both sides trimmed when playing back wide-screen picture.

If you have a widescreen TV:

Select “16:9 Wide”.

Introduction
Connections
Basic Setup
Management	Disc

3)Use [K / L] to select “Yes“ within 15 seconds, then press [ENTER].

Your setting will be activated.

Note

•If your TV is compatible with progressive scan (525p / 480p), you are recommended to use the HDMI or component video cable (commercially available) to connect this unit to the TV. (Refer to “Method 3” on page 20.) If not, use the RCA video cable and set the progressive scan to “OFF” or press and hold [SETUP] for more than 3 seconds during DVD playback.

•When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan).

Recording Playback

Editing Function Setup Others

EN 91

E7E7AUD_EN.indb 91 2007/01/29 19:04:37