Toshiba D-R400 owner manual Satellite Link, Press Enter again, To Standby Mode is highlighted

					SATELLITE LINK
5	Press [ENTER].
	“To Standby Mode” is highlighted.
6	Press [ENTER] again.
		Satellite Link
			Start	Mode
			12:00 AM	XP

To Standby Mode

In a second, the unit will be turned off automatically as it goes into the satellite link standby mode.

To cancel the satellite link function while in the satellite link standby mode:

Press [I/y ON/STANDBY] to turn on the unit.

To cancel the satellite link function while the satellite link recording is in progress:

Press [STOP C] on the front panel of the unit.

Note

•If the signal of external input breaks up over 5 seconds, satellite link function will be canceled.

•If you have not set the clock, “Clock Setting” menu will appear at step 1. Follow to step 3 in “CLOCK SETTING” on page 25.

•You cannot set the end time for the satellite link timer recording on this unit.

•Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording.

•You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 41 for more information.

•Press [TIMER PROG.] during the satellite link timer recording to check the satellite link timer recording in progress.

•When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below.

example 1

timer recording

satellite link

actual recording

The first 2 minutes (at the longest) will be cut off.

example 2

timer recording

satellite link

actual recording

example 3

timer recording

satellite link

actual recording

The first 2 minutes (at the longest) will be cut off.

44 EN

E7E7AUD_EN.indb 44 2007/01/29 19:04:00