Manuals / Toshiba / TV and Video / DVD Recorder

Toshiba D-RW2SU/D-RW2SC RF modulator Connection, 26 EN, Connections, Cable TV Antenna, signal

Models: D-RW2SU/D-RW2SC

1 159

Download 159 pages 35.65 Kb

Page 26

RF modulator Connection

Connections

RF modulator Connection

If your TV has Antenna in jack only, it is still possible to connect this unit to your TV by using a Stereo Audio/Video RF modulator. In this case, follow the instructions below.

1)The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then connect the RF cable to the ANTENNA IN jack of this unit.

2)Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked “ANT IN”) by the RF cable.

3)Connect your RF modulator to your TV by another RF cable.

4)Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by Audio/Video cables.

5)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a Modulator/Antenna switch, set it according to your RF modulator’s manual.

6)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.

For more details, follow the instructions supplied with the RF modulator.

Cable TV Antenna		(Back of this unit)
signal				COMPONENT
	IN		VIDEO IN	VIDEO OUTPUT	VIDEO OUT
	IN		S-VIDEO		Y		Audio/Video cables
	OUT		S-VIDEO		Y
	OUT		IN	OUT
			L		L		(supplied)
					R		(supplied)
					PB/CB
			R
			AUDIO IN		PR/CR
			(L1)		AUDIO OUT
			(L1)
	RF cable			Set channel 3 or 4.
	(supplied)			Set channel 3 or 4.
	(supplied)
		AC 120V ANT IN		CHANNEL TO TV		AUDIO IN VIDEO IN
				3	4	R	L
	STEREO AUDIO/VIDEO						Antenna in jack
	STEREO AUDIO/VIDEO
			RF Modulator				RF cable (commercially available)
	(commercially available)						RF cable (commercially available)
	(commercially available)

Turn on your TV

and select channel

3 or 4.

(Back of TV)

Note

• The quality of picture may become poor if this unit is connected to an RF modulator.

26 EN

Image 26

Toshiba D-RW2SU/D-RW2SC RF modulator Connection, 26 EN, Connections, Cable TV Antenna, Back of this unit, signal, supplied

Contents

REC MODE D-RW2SU / D-RW2SC BasicD-RW2SU / D-RW2SC ON/STANDBYSERVICE PERSONNEL PrecautionsLaser Safety 2 ENEditing Function Setup Others IMPORTANT SAFEGUARDSIntroduction Precautions cont’d Installation LocationSupplied Accessory For safety and optimum performance of this unitCLEANING THE DISC LENS MaintenanceCLEANING THE CABINET Introduction Connections Basic Setup6 EN Table of contentsBasic Setup IntroductionEditing Function SetupPlayback OthersAutomatic Chapter marks setting FeaturesOne-touch Timer Recording 8 ENChoosing a disc Using different disc types for different purposesSpecification DVD disc typesIntroduction Choosing a disc cont’d 10 ENFor playback only DVD videoOn DVD-RW discs Setup Recording Playback Editing Function Setup OthersOn DVD-R discs Marks on DVD video discsYes No Structure of disc contentsOn cleaning discs 12 ENDiscs and purposes Editing Function Setup OthersFront Panel Index to parts and controls14 EN 15. Remote control sensorOthers Rear PanelPlayback 4. AC Power Cord16 EN Introduction Index to parts and controls cont’d11. TIMER PROG. button Editing Function Setup Others5. Direction buttons K / L / / B Press to select items or settings 25. SETUP buttonDisplay message 18 ENFront Panel Display Guide Introduction Index to parts and controls cont’dKeep in mind the following when using the remote control Installing batteries in the remote controlUsing a remote control 1 Open the cover 2 Insert batteries20 EN Setup menuOn Screen menu Display menu2. Finalize Editing Function Setup Others1. Format DVD-RW only 3. Disc Protect VR mode onlyPage Connection to a cable box or satellite box ConnectionsConnection to a TV RF modulator Connection Connection to an Audio System24 EN Plug in the AC power cord of this unitConnection to a TV ConnectionsAUDIO OUT IntroductionBasic Audio Editing Function Setup Otherssignal RF modulator Connection26 EN ConnectionsConnection to a cable box or satellite box With this setupNote to the Cable TV System Installer ConnectionsMethod Connection to an Audio System28 EN Stereo systemSetting the clock Selecting TV aspect ratio Basic SetupInitial setting Channel setting Selecting TV stereo or SAP Start Initial settingBasic Setup 30 ENEditing Function Setup Others 4 Press ENTER to start Channel Preset6 Follow the steps 3 to 7 on pages 41-43 for “Manual Clock Setting” Initial Setting Channel Preset1 Press SETUP Channel settingSetting channels automatically 2 Using K / L, select “Channel” Press ENTEREditing Function Setup Others 3 Using K / L, select “Auto Preset” Press ENTER4 Press SETUP after scanning Notes for using the Number buttonsBasic Setup Channel setting cont’d 1 Press SETUP 2 Using K / L, select “Channel” Press ENTER3 Using K / L, select “Manual Preset” Press ENTER 34 ENPlayback Editing Function Setup Others 5 Using K / L, select “Add” or “Delete” Press ENTER6 Press SETUP to exit Select the channel number to add or deleteSelecting TV stereo or SAP 1 Press SETUP 2 Using K / L, select “Required Setting” Press ENTERUsing K / L, select “TV Audio Select” Press ENTER 36 ENEditing Function Setup Others 4 Using K / L, select “Stereo” or “SAP” Press ENTER5 Press SETUP to exit Stereo1 Press SETUP 2 Using K / L, select “Clock”. Press ENTER Setting the clockAuto Clock Setting 3 Using K / L, select “Auto Clock Setting” Press ENTERPress ENTER 40 EN 5 Press SETUP to exit 6 Press I/y ON/STANDBY to turn off the unitBasic Setup Setting the clock cont’d Press ENTER again Manual Clock Setting3 Using K / L, select “Clock Setting” Press ENTER 1 Press SETUP 2 Using K / L, select “Clock”. Press ENTER42 EN 4 Using K / L, enter the date month / day / year5 Using K / L, enter the time hour / minute. Press / B Basic Setup Setting the clock cont’dEditing Function Setup Others 7 Press SETUP to exit, if Clock menu appears6 Press K / L to select “AM” or “PM” Press ENTER “ON” has been selected as the default Setting the Daylight Saving Time3 Using K / L, select “Daylight Saving Time” 44 ENEditing Function Setup Others 4 Using K / L, select “ON” or “OFF” Press ENTER5 Press SETUP to exit Introduction Connections Basic Setup Recording PlaybackSelecting the TV aspect ratio 3 Using K / L, select “TV Aspect” Press ENTER“43 Letter Box” has been selected as the default 46 ENEditing Function Setup Others 4 Using K / L, select a desired format Press ENTER5 Press SETUP to exit Introduction Connections Basic Setup Recording PlaybackPage Settings for an external source Setting disc protection Symbols in this SectionBasic recording One-touch Timer Recording Timer Recording RecordingInformation Information on DVD recording50 EN Restrictions on recordingAfter finalizing Information on copy controlMaking discs playable in other DVD players Finalize Editing Function Setup OthersSelecting the Recording format Using K / L, select “Disc”. Press ENTER3 Using K / L, select “Format” Press ENTER 52 EN6 Press SETUP to exit 4 Using K / L, select “Format Mode” Press ENTER5 Using K / L, select “Video mode” or “VR mode”. Press ENTER Editing Function Setup Others4 Using K / L, select “Start”. Press ENTER Setting for Auto Chapter1 Press SETUP 1 Press SETUP 2 Using K / L, select “Recording”. Press ENTERRecording Audio Select XP 3 Using K / L, select “Recording Audio Select XP”. Press ENTER4 Using K / L, select “PCM”or “Dolby 1 Press SETUP 2 Using K / L, select “Recording”. Press ENTER2 Press OPEN/CLOSE A Basic recording56 EN 4 Press OPEN/CLOSE A to close the disc trayEditing Function Setup Others 5 Using REC MODE, select a recording mode7 Press REC I to start recording Introduction Connections Basic Setup Recording PlaybackRecording Basic recording cont’d 58 EN8 Press STOP C to stop recording This operation may take a while to be completedWhen the recording ﬁnishes the recorder automatically One-touch Timer Recording2 Using REC MODE, select a recording mode 1 Press I/y ON/STANDBY to turn on the unit and load a recordable disc4 Press REC I repeatedly to select desired recording time Recording One-touch Timer Recording cont’d60 EN 030 Normal Recording 8002 Using K / L, select a program number Press ENTER Timer Recording1 Press TIMER PROG Be sure to set the clock before setting a timer programmingRecording Timer Recording cont’d 3 Using K / L, enter the Date. Press B4 Using K / L, enter the Start and End. Press B 62 ENEditing Function Setup Others 5 Using K / L, select the channel number to record. Press B6 Using K / L, select a recording mode Recording Timer Recording cont’d 8 Press I/y ON/STANDBY to go into the timer standby mode64 EN If you have not set the clock yet36 min Recording Mode18 min 8cm DiscIf the timer program did not complete correctly Checking, canceling, or correctingthe timer programming the error number appears in the TimerWhen some programming have been made at Hints for Timer RecordingThe priority of overlapped settings When the starting time is same68 EN Settings for an external source1Press SETUP 2 Using K / L, select “Required Setting” Press ENTER Connection to an external source5 Using K / L, select the input jack type to connect. Press ENTER 3 Using K / L, select “Select Video” Press ENTER4 Using K / L, select “L2 Front” or “L1 Rear”. Press ENTER 6 Press SETUP to exit2 Press OPEN/CLOSE A to open the disc tray 70 ENRecording from an external source Place the disc to record properly7 Press “Play” on the external source to record from 5 Select a recording mode pressing REC MODE6 Press REC I on the unit to start recording 8 Press STOP C on the front panel of the unit to stop recordingUsing K / L, select Setting disc protection1 Press SETUP 2 Using K / L, select “Disc”. Press ENTER 72 ENTo cancel the disc protect 4 Using K / L, select “Yes”. Press ENTEREditing Function Setup Others 74 EN 3 Using K / L, select “Finalize”. Press ENTERFinalizing the discs 1 Press SETUP 2 Using K / L, select “Disc”. Press ENTEREditing Function Setup Others 5 Finalizing is completed4 Using K / L, select “Yes”. Press ENTER To cancel finalizing76 EN 1 Press SETUP 2 Using K / L, select “Recording”. Press ENTERUsing K / L, select “Auto Finalize”. Press Auto finalize6 Press SETUP to exit 4 Using K / L, select “Disc Full” or “End of Timer Rec”. Press ENTER5 Using K / L, select “ON”. Press ENTER Editing Function Setup OthersPage Selecting the format of audio and video PlaybackBasic playback Further playback Special playback Symbols in this SectionPress I/y ON/STANDBY Basic playback80 EN PlaybackIntroduction Connections Basic Setup Recording Playback Editing Function Setup OthersVR mode using Press TOP MENU to display the title list82 EN 6 Using K / L/ / B, select a desired title Press ENTER7 Using K / L, select “Play”. Press ENTER 8 Press STOP C to stop playback5 Press STOP C to stop playback Playing back a DVD-VIDEO / Video CD / CD4 Press PLAY B to start playback StartPlaying MP3, WMA, JPEG disc 2 Using K / L, to select a desired folder group or track. Press ENTER84 EN 1 In stop mode, press TOP MENU to call up the menuEditing Function Setup Others Hints for MP3, WMA and JPEG files2 Using K / L/ // B, select an item. Press ENTER to confirm Playing discs using the Disc menuPlaying discs using the Title menu 2 Using K / L / / B, select a title to play Press ENTERInsert a Video CD 1 In stop mode, press SETUP Playing back a Video CD using the title menuCancelling and Recalling the PBC function 2 Select “CD Playback Mode” using K / L, then press ENTERRapid Play 88 ENResume Play Skipping TV commercials during play1 During playback, press FWD D or REV E Fast forward / Fast reverseSlow forward / Slow reverse 1 During playback, press PAUSE F. Then press FWD D or REV E3 Using K / L / / B, select a desired zoom position. Press ENTER Marker Setup2 Using K / L, selecta desired zoomfactor to zoom. Press ENTER 2 Using / B, select . Press ENTER2 Using / B, select .Press ENTER Using SKIP H / GUsing DISPLAY Searching by Title, Chapter or Track2 Using K / L, select a desired option to repeat Press ENTER 1 Press SETUP in stop mode 2 Using K / L, select “CD Playback Mode”3 Using K / L, select “Random Play”. Press ENTER 92 EN2 Select “Slide Show” using K / L, then press ENTER 3 Using K / L, select “Program Play”. Press ENTER4 Using K / L, select a desired track. Press 3 Select the display time using K / L, then press ENTER2 Using / B, select Switching subtitlesSwitching audio soundtrack 2 Using / B, select2 Using / B, select . Press ENTER Switching virtual surround system3 Using K / L, select “OFF”, “Type 1” or “Type 2”. Press ENTER Editing Function Setup Others4 Using K / L, select a desired option. Press ENTER Switching camera angles3 Using K / L, select “Noise Reduction”. Press ENTER 96 EN2 Using / B, select . Press ENTER Adjusting Black Level3 Using K / L, select “Black Level”. Press ENTER Editing Function Setup OthersPage Symbols in this Section EditingInformation on disc editing Editing discs Guide to a title list Information on disc editing100 EN Edit the recorded discNotes for deleting titles Editing Function SetupEditing discs DVD-RWEditing discs 2 Using K / L / / B, select the desired title Press ENTER3 Using K / L, select “Edit”. Press ENTER 102 ENEditing Function Setup Others 4 Using K / L, select “Title Delete” Press ENTER5 Using K / L, select “Yes”. Press ENTER Introduction Connections Basic Setup Recording PlaybackEditing Editing discs cont’d 104 EN6 After this operation is completed, press RETURN or STOP C to exit 1 Follow steps 1 to 3 on page 102 to display the Edit menu Using K / L, select “Edit Title Name” Press ENTEREditing title names You can change the title names from this menu“Guide to edit title name” on next page 3 Using K / L, select “Yes”. Press ENTER106 EN 4 Press RETURN and then RETURN or STOP C to exitRecording Playback Guide to edit title nameA B C A Editing Function Setup OthersAdding or deleting chapter marks Using K / L, select “Chapter Mark” Press ENTER108 EN 1 Follow steps 1 to 3 on page 102 to display the Edit menuIntroduction Connections Basic Setup Recording Playback 3 Using K / L, select “Yes”. Press ENTEREditing Function Setup Others Playlist - Chapter Mark - Add1 Follow steps 1 to 3 on page 102 to display the Edit menu Setting pictures for thumbnails110 EN Press ENTERIntroduction Connections Basic Setup Recording Playback 3 Using K / L, select “Yes”. Press ENTEREditing Function Setup Others Playlist - Index PictureDeleting parts of titles Using K / L, select “Scene Delete”. Press ENTER112 EN You can delete a speciﬁc part of a titleThen use SKIP H / G, REV E 4 Using K / L, select “Yes”. Press ENTER 3 Using K / L, select “Delete”. Press ENTER114 EN Editing Editing discs cont’dEditing Function Setup Others Dividing a title Using K / L, select “Title Dividing” Press ENTER116 EN 1 Follow steps 1 to 3 on page 102 to display the Edit menuEditing Function Setup Others 4 After this operation is completed, press RETURN or STOP C to exit3 Using K / L, select “Yes”. Press ENTER 118 EN Using K / L, select “Title Combining”. Press ENTER2 Using K / L / s / B, select another title to combine. Press ENTER Combining titles4 After this operation is completed, press RETURN or STOP C to exit 3 Using s / B, select “Yes”. Press ENTEREditing Function Setup Others Adding titles to a Playlist 3 Using K / L, select “Add New Title” Press ENTER120 EN 1 Follow step 1 on page 102 to display the PlaylistEditing Function Setup Others 4 Using K / L / s / B, select a desired title Press ENTER5 After this operation is completed, press RETURN or STOP C to exit Erasing all Playlist 3 Using K / L, select “Delete Playlist” Press ENTER122 EN You can erase all titles in the PlaylistEditing Function Setup Others 4 Using s / B, select “Yes”. Press ENTER5 Using s / B, select “Yes”. Press ENTER 6 After this operation is completed, press RETURN or STOP C to exitYou can cancel the title protection feature after it is applied Setting or releasing the title protectionUsing K / L, select “Protect”. Press ENTER 124 ENIntroduction Connections Basic Setup Recording Playback To protect the whole disc DVD-RW VR mode OnlyEditing Function Setup Others 126 EN Setting or clearing all the chapter marks in one title2 Using K / L, select desired time period Press ENTER Using K / L, select “Chapter Mark” Press ENTERThis operation may take a while to be completed 3 Using K / L, select “Yes”. Press ENTEREditing Function Setup Others Page Settings for Parental lock level Settings for Progressive Scan Mode Function SetupTour of the Setup menu Language setting Display setting Audio setting Settings for Still ModeSetup Tour of the Setup menuFunction Setup Items highlight is the defaultContents SetupItems highlight is the default Editing Function Setup Others3 Using K / L, select “Language” Press ENTER Language setting1 Press SETUP 2 Using K / L, select “Playback” Press ENTER 132 ENAudio Language Default Original 4 Using K / L, select a desired item Press ENTERDisc Menu Language Default English Subtitle Language Default OFF134 EN If “Other” is selected, press 4-digit code using theFunction Setup Language setting cont’d Number buttons. Refer to “Language code” on page3 Using K / L, select a desired item Press ENTER Display setting1 Press SETUP 2 Using K / L, select “Display” Press ENTER OSD Language Default EnglishScreen Saver Default 10 minutes 4 Press SETUP to exitFunction Setup Display setting cont’d Angle Icon Default ON FL Dimmer Default Bright3 Using K / L, select “Audio”. Press ENTER Audio setting1 Press SETUP 2 Using K / L, select “Playback”. Press ENTER Choose the appropriate Audio settings for your equipmentUsing K / L, select a setting. Press ENTER Function Setup Audio setting cont’d138 EN When playing disc with copyright protectionSelect a setting using K / L, then press ENTER Dynamic Range Control Default ON4 Press SETUP to exit Digital Out - DTS ON OFF140 EN Settings for Parental lock levelUsing K / L, select “Parental Lock” 3 Press ENTERRecording 4 Using K / L, select the desired level Press ENTERParental Lock Default All Using K / L, change the parental level. Press ENTER All5 Press SETUP to exit Function Setup Settings for Parental lock level cont’d142 EN Using the Number buttons, enter the current password1 Press SETUP 2 Using K / L, select “Playback” Press ENTER Using K / L, select “Video”. Press ENTERSettings for Progressive Scan Mode StartFunction Setup Settings for Progressive Scan Mode cont’d 4 Using K / L, select “Progressive” Press ENTER6 Using / B, select “Yes”. Press ENTER 144 ENVideo - Progressive Confirm again to use progressive scan 7 Using K / L, select “Yes”. Press ENTER within 15 seconds8 Press SETUP to exit If Picture is good, Select “Yes” Yes No2 Using K / L, select “Still Mode”. Press ENTER Settings for Still Mode1 Follow steps 1 to 3 on page 143 to display the Video setting menu 3 Using K / L, select a setting. Press ENTERTroubleshooting Language code Glossary Specifications OthersRemote control TroubleshootingPower The power does not turn onTimer Recording is not complete or did not start from the beginning Recording/Timer Recording/EditingNothing was recorded even though you set the timer setting correctly The disc does not playThe disc tray does not open when you press OPEN/CLOSE A Error messageOthers Troubleshooting cont’d “Repairing” appears on the TV screenEditing Function Setup Others Error messageSolution CauseCan I record to CD-R/RW? No, this unit records only DVDs Frequently Asked Questions152 EN Can I play DVD-Video that is bought in another country?Code Language codeLanguage Abkhazian154 EN CPRM Content Protection for Recordable MediaGlossary Analog audioRegions code PlaylistProgressive Scan 525p/480p Sampling frequencyDimensions width x height x depth Power requirements AC120 V, 60 Hz Power consumptionWeight SpeciﬁcationsDigital Audio Video “DAV” Product - Exchange Warranty Setup Recording Playback Editing Function Setup OthersLimited United States Warranty Limited Warranty158 EN OthersConnections Basic SetupFunction Setup Introduction