Manuals / Toshiba / TV and Video / DVD Recorder

Toshiba D-RW2SU/D-RW2SC manual Installing batteries in the remote control, Using a remote control

Models: D-RW2SU/D-RW2SC

1 159

Download 159 pages 35.65 Kb

Page 19

Preparation of the remote control

Introduction

Preparation of the remote control

Introduction

Installing batteries in the remote control

■Install two “AA” size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control.

1 Open the cover.

2 Insert batteries.

Make sure to match the + and - on the batteries to the marks inside the battery compartment.

3 Close the cover.

Caution:

Never throw batteries into a fire.

Notes:

•Be sure to use AA size batteries.

•Dispose of batteries in a designated disposal area.

•Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.

•If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones.

•When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination.

•Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.

Using a remote control

■Keep in mind the following when using the remote control:

•Make sure that there is no obstacle between the remote control and the remote sensor on the unit.

•Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the unit.

•Remote control for different devices can interfere with each other. Avoid using remote control for other equipment located close to the unit.

•Replace the batteries when you notice a fall off in the operating range of the remote control.

•The maximum operable ranges from the unit are as follows.

-Line of sight: approx. 23 feet (7m)

-Either side of the center: approx. 23 feet (7m) within 30°

I/y

EN 19

Connections Basic Setup Recording Playback

Editing Function Setup Others

Image 19

Toshiba D-RW2SU/D-RW2SC Installing batteries in the remote control, Using a remote control, Close the cover, Introduction

Contents

ON/STANDBY REC MODED-RW2SU / D-RW2SC Basic D-RW2SU / D-RW2SC2 EN PrecautionsLaser Safety SERVICE PERSONNELIMPORTANT SAFEGUARDS Editing Function Setup OthersFor safety and optimum performance of this unit Installation LocationSupplied Accessory Introduction Precautions cont’dIntroduction Connections Basic Setup MaintenanceCLEANING THE CABINET CLEANING THE DISC LENSIntroduction Table of contentsBasic Setup 6 ENOthers Function SetupPlayback EditingAutomatic Playlist making VR mode FeaturesOne-touch Timer Recording Automatic Chapter marks settingDVD disc types Using different disc types for different purposesSpecification Choosing a discDVD video 10 ENFor playback only Introduction Choosing a disc cont’dMarks on DVD video discs Setup Recording Playback Editing Function Setup OthersOn DVD-R discs On DVD-RW discs12 EN Structure of disc contentsOn cleaning discs Yes NoEditing Function Setup Others Discs and purposes14. REC MODE button Index to parts and controls14 EN Front Panel4. AC Power Cord Rear PanelPlayback OthersIntroduction Index to parts and controls cont’d 16 EN12. REC MODE button Editing Function Setup Others5. Direction buttons K / L / / B Press to select items or settings 11. TIMER PROG. button3. Recording mode 18 ENFront Panel Display Guide Display message1 Open the cover 2 Insert batteries Installing batteries in the remote controlUsing a remote control Keep in mind the following when using the remote controlDisplay menu Setup menuOn Screen menu 20 EN2. Finalize Editing Function Setup Others3. Disc Protect VR mode only 1. Format DVD-RW onlyPage Connection to an Audio System ConnectionsConnection to a TV RF modulator Connection Connection to a cable box or satellite boxConnections Plug in the AC power cord of this unitConnection to a TV 24 ENEditing Function Setup Others IntroductionBasic Audio AUDIO OUTConnections RF modulator Connection26 EN signalConnections With this setupNote to the Cable TV System Installer Connection to a cable box or satellite boxStereo system Connection to an Audio System28 EN MethodInitial setting Channel setting Selecting TV stereo or SAP Basic SetupSetting the clock Selecting TV aspect ratio 30 EN Initial settingBasic Setup StartInitial Setting Channel Preset 4 Press ENTER to start Channel Preset6 Follow the steps 3 to 7 on pages 41-43 for “Manual Clock Setting” Editing Function Setup Others2 Using K / L, select “Channel” Press ENTER Channel settingSetting channels automatically 1 Press SETUPNotes for using the Number buttons 3 Using K / L, select “Auto Preset” Press ENTER4 Press SETUP after scanning Editing Function Setup Others34 EN 1 Press SETUP 2 Using K / L, select “Channel” Press ENTER3 Using K / L, select “Manual Preset” Press ENTER Basic Setup Channel setting cont’dSelect the channel number to add or delete 5 Using K / L, select “Add” or “Delete” Press ENTER6 Press SETUP to exit Playback Editing Function Setup Others36 EN 1 Press SETUP 2 Using K / L, select “Required Setting” Press ENTERUsing K / L, select “TV Audio Select” Press ENTER Selecting TV stereo or SAPStereo 4 Using K / L, select “Stereo” or “SAP” Press ENTER5 Press SETUP to exit Editing Function Setup Others3 Using K / L, select “Auto Clock Setting” Press ENTER Setting the clockAuto Clock Setting 1 Press SETUP 2 Using K / L, select “Clock”. Press ENTERPress ENTER Basic Setup Setting the clock cont’d 5 Press SETUP to exit 6 Press I/y ON/STANDBY to turn off the unit40 EN 1 Press SETUP 2 Using K / L, select “Clock”. Press ENTER Manual Clock Setting3 Using K / L, select “Clock Setting” Press ENTER Press ENTER againBasic Setup Setting the clock cont’d 4 Using K / L, enter the date month / day / year5 Using K / L, enter the time hour / minute. Press / B 42 EN6 Press K / L to select “AM” or “PM” Press ENTER 7 Press SETUP to exit, if Clock menu appearsEditing Function Setup Others 44 EN Setting the Daylight Saving Time3 Using K / L, select “Daylight Saving Time” “ON” has been selected as the defaultIntroduction Connections Basic Setup Recording Playback 4 Using K / L, select “ON” or “OFF” Press ENTER5 Press SETUP to exit Editing Function Setup Others46 EN 3 Using K / L, select “TV Aspect” Press ENTER“43 Letter Box” has been selected as the default Selecting the TV aspect ratioIntroduction Connections Basic Setup Recording Playback 4 Using K / L, select a desired format Press ENTER5 Press SETUP to exit Editing Function Setup OthersPage Recording Symbols in this SectionBasic recording One-touch Timer Recording Timer Recording Settings for an external source Setting disc protectionRestrictions on recording Information on DVD recording50 EN InformationEditing Function Setup Others Information on copy controlMaking discs playable in other DVD players Finalize After finalizing52 EN Using K / L, select “Disc”. Press ENTER3 Using K / L, select “Format” Press ENTER Selecting the Recording formatEditing Function Setup Others 4 Using K / L, select “Format Mode” Press ENTER5 Using K / L, select “Video mode” or “VR mode”. Press ENTER 6 Press SETUP to exit1 Press SETUP 2 Using K / L, select “Recording”. Press ENTER Setting for Auto Chapter1 Press SETUP 4 Using K / L, select “Start”. Press ENTER1 Press SETUP 2 Using K / L, select “Recording”. Press ENTER 3 Using K / L, select “Recording Audio Select XP”. Press ENTER4 Using K / L, select “PCM”or “Dolby Recording Audio Select XP4 Press OPEN/CLOSE A to close the disc tray Basic recording56 EN 2 Press OPEN/CLOSE AIntroduction Connections Basic Setup Recording Playback 5 Using REC MODE, select a recording mode7 Press REC I to start recording Editing Function Setup OthersThis operation may take a while to be completed 58 EN8 Press STOP C to stop recording Recording Basic recording cont’d1 Press I/y ON/STANDBY to turn on the unit and load a recordable disc One-touch Timer Recording2 Using REC MODE, select a recording mode When the recording ﬁnishes the recorder automatically030 Normal Recording 800 Recording One-touch Timer Recording cont’d60 EN 4 Press REC I repeatedly to select desired recording timeBe sure to set the clock before setting a timer programming Timer Recording1 Press TIMER PROG 2 Using K / L, select a program number Press ENTER62 EN 3 Using K / L, enter the Date. Press B4 Using K / L, enter the Start and End. Press B Recording Timer Recording cont’d6 Using K / L, select a recording mode 5 Using K / L, select the channel number to record. Press BEditing Function Setup Others If you have not set the clock yet 8 Press I/y ON/STANDBY to go into the timer standby mode64 EN Recording Timer Recording cont’d8cm Disc Recording Mode18 min 36 minthe error number appears in the Timer Checking, canceling, or correctingthe timer programming If the timer program did not complete correctlyWhen the starting time is same Hints for Timer RecordingThe priority of overlapped settings When some programming have been made atConnection to an external source Settings for an external source1Press SETUP 2 Using K / L, select “Required Setting” Press ENTER 68 EN6 Press SETUP to exit 3 Using K / L, select “Select Video” Press ENTER4 Using K / L, select “L2 Front” or “L1 Rear”. Press ENTER 5 Using K / L, select the input jack type to connect. Press ENTERPlace the disc to record properly 70 ENRecording from an external source 2 Press OPEN/CLOSE A to open the disc tray8 Press STOP C on the front panel of the unit to stop recording 5 Select a recording mode pressing REC MODE6 Press REC I on the unit to start recording 7 Press “Play” on the external source to record from72 EN Setting disc protection1 Press SETUP 2 Using K / L, select “Disc”. Press ENTER Using K / L, selectEditing Function Setup Others 4 Using K / L, select “Yes”. Press ENTERTo cancel the disc protect 1 Press SETUP 2 Using K / L, select “Disc”. Press ENTER 3 Using K / L, select “Finalize”. Press ENTERFinalizing the discs 74 ENTo cancel finalizing 5 Finalizing is completed4 Using K / L, select “Yes”. Press ENTER Editing Function Setup OthersAuto finalize 1 Press SETUP 2 Using K / L, select “Recording”. Press ENTERUsing K / L, select “Auto Finalize”. Press 76 ENEditing Function Setup Others 4 Using K / L, select “Disc Full” or “End of Timer Rec”. Press ENTER5 Using K / L, select “ON”. Press ENTER 6 Press SETUP to exitPage Symbols in this Section PlaybackBasic playback Further playback Special playback Selecting the format of audio and videoPlayback Basic playback80 EN Press I/y ON/STANDBYVR mode Editing Function Setup OthersVR mode using Video mode8 Press STOP C to stop playback 6 Using K / L/ / B, select a desired title Press ENTER7 Using K / L, select “Play”. Press ENTER 82 ENStart Playing back a DVD-VIDEO / Video CD / CD4 Press PLAY B to start playback 5 Press STOP C to stop playback1 In stop mode, press TOP MENU to call up the menu 2 Using K / L, to select a desired folder group or track. Press ENTER84 EN Playing MP3, WMA, JPEG discHints for MP3, WMA and JPEG files Editing Function Setup Others2 Using K / L / / B, select a title to play Press ENTER Playing discs using the Disc menuPlaying discs using the Title menu 2 Using K / L/ // B, select an item. Press ENTER to confirm2 Select “CD Playback Mode” using K / L, then press ENTER Playing back a Video CD using the title menuCancelling and Recalling the PBC function Insert a Video CD 1 In stop mode, press SETUPSkipping TV commercials during play 88 ENResume Play Rapid Play1 During playback, press PAUSE F. Then press FWD D or REV E Fast forward / Fast reverseSlow forward / Slow reverse 1 During playback, press FWD D or REV E2 Using / B, select . Press ENTER Marker Setup2 Using K / L, selecta desired zoomfactor to zoom. Press ENTER 3 Using K / L / / B, select a desired zoom position. Press ENTERSearching by Title, Chapter or Track Using SKIP H / GUsing DISPLAY 2 Using / B, select .Press ENTER92 EN 1 Press SETUP in stop mode 2 Using K / L, select “CD Playback Mode”3 Using K / L, select “Random Play”. Press ENTER 2 Using K / L, select a desired option to repeat Press ENTER3 Select the display time using K / L, then press ENTER 3 Using K / L, select “Program Play”. Press ENTER4 Using K / L, select a desired track. Press 2 Select “Slide Show” using K / L, then press ENTER2 Using / B, select Switching subtitlesSwitching audio soundtrack 2 Using / B, selectEditing Function Setup Others Switching virtual surround system3 Using K / L, select “OFF”, “Type 1” or “Type 2”. Press ENTER 2 Using / B, select . Press ENTER96 EN Switching camera angles3 Using K / L, select “Noise Reduction”. Press ENTER 4 Using K / L, select a desired option. Press ENTEREditing Function Setup Others Adjusting Black Level3 Using K / L, select “Black Level”. Press ENTER 2 Using / B, select . Press ENTERPage Information on disc editing Editing discs EditingSymbols in this Section Edit the recorded disc Information on disc editing100 EN Guide to a title listDVD-RW Editing Function SetupEditing discs Notes for deleting titles102 EN 2 Using K / L / / B, select the desired title Press ENTER3 Using K / L, select “Edit”. Press ENTER Editing discsIntroduction Connections Basic Setup Recording Playback 4 Using K / L, select “Title Delete” Press ENTER5 Using K / L, select “Yes”. Press ENTER Editing Function Setup Others6 After this operation is completed, press RETURN or STOP C to exit 104 ENEditing Editing discs cont’d You can change the title names from this menu Using K / L, select “Edit Title Name” Press ENTEREditing title names 1 Follow steps 1 to 3 on page 102 to display the Edit menu4 Press RETURN and then RETURN or STOP C to exit 3 Using K / L, select “Yes”. Press ENTER106 EN “Guide to edit title name” on next pageEditing Function Setup Others Guide to edit title nameA B C A Recording Playback1 Follow steps 1 to 3 on page 102 to display the Edit menu Using K / L, select “Chapter Mark” Press ENTER108 EN Adding or deleting chapter marksPlaylist - Chapter Mark - Add 3 Using K / L, select “Yes”. Press ENTEREditing Function Setup Others Introduction Connections Basic Setup Recording PlaybackPress ENTER Setting pictures for thumbnails110 EN 1 Follow steps 1 to 3 on page 102 to display the Edit menuPlaylist - Index Picture 3 Using K / L, select “Yes”. Press ENTEREditing Function Setup Others Introduction Connections Basic Setup Recording PlaybackYou can delete a speciﬁc part of a title Using K / L, select “Scene Delete”. Press ENTER112 EN Deleting parts of titlesThen use SKIP H / G, REV E Editing Editing discs cont’d 3 Using K / L, select “Delete”. Press ENTER114 EN 4 Using K / L, select “Yes”. Press ENTEREditing Function Setup Others 1 Follow steps 1 to 3 on page 102 to display the Edit menu Using K / L, select “Title Dividing” Press ENTER116 EN Dividing a title3 Using K / L, select “Yes”. Press ENTER 4 After this operation is completed, press RETURN or STOP C to exitEditing Function Setup Others Combining titles Using K / L, select “Title Combining”. Press ENTER2 Using K / L / s / B, select another title to combine. Press ENTER 118 ENEditing Function Setup Others 3 Using s / B, select “Yes”. Press ENTER4 After this operation is completed, press RETURN or STOP C to exit 1 Follow step 1 on page 102 to display the Playlist 3 Using K / L, select “Add New Title” Press ENTER120 EN Adding titles to a Playlist5 After this operation is completed, press RETURN or STOP C to exit 4 Using K / L / s / B, select a desired title Press ENTEREditing Function Setup Others You can erase all titles in the Playlist 3 Using K / L, select “Delete Playlist” Press ENTER122 EN Erasing all Playlist6 After this operation is completed, press RETURN or STOP C to exit 4 Using s / B, select “Yes”. Press ENTER5 Using s / B, select “Yes”. Press ENTER Editing Function Setup Others124 EN Setting or releasing the title protectionUsing K / L, select “Protect”. Press ENTER You can cancel the title protection feature after it is appliedEditing Function Setup Others To protect the whole disc DVD-RW VR mode OnlyIntroduction Connections Basic Setup Recording Playback Using K / L, select “Chapter Mark” Press ENTER Setting or clearing all the chapter marks in one title2 Using K / L, select desired time period Press ENTER 126 ENEditing Function Setup Others 3 Using K / L, select “Yes”. Press ENTERThis operation may take a while to be completed Page Settings for Still Mode Function SetupTour of the Setup menu Language setting Display setting Audio setting Settings for Parental lock level Settings for Progressive Scan ModeItems highlight is the default Tour of the Setup menuFunction Setup SetupEditing Function Setup Others SetupItems highlight is the default Contents132 EN Language setting1 Press SETUP 2 Using K / L, select “Playback” Press ENTER 3 Using K / L, select “Language” Press ENTERSubtitle Language Default OFF 4 Using K / L, select a desired item Press ENTERDisc Menu Language Default English Audio Language Default OriginalNumber buttons. Refer to “Language code” on page If “Other” is selected, press 4-digit code using theFunction Setup Language setting cont’d 134 ENOSD Language Default English Display setting1 Press SETUP 2 Using K / L, select “Display” Press ENTER 3 Using K / L, select a desired item Press ENTERFL Dimmer Default Bright 4 Press SETUP to exitFunction Setup Display setting cont’d Angle Icon Default ON Screen Saver Default 10 minutesChoose the appropriate Audio settings for your equipment Audio setting1 Press SETUP 2 Using K / L, select “Playback”. Press ENTER 3 Using K / L, select “Audio”. Press ENTERWhen playing disc with copyright protection Function Setup Audio setting cont’d138 EN Using K / L, select a setting. Press ENTERDigital Out - DTS ON OFF Dynamic Range Control Default ON4 Press SETUP to exit Select a setting using K / L, then press ENTER3 Press ENTER Settings for Parental lock levelUsing K / L, select “Parental Lock” 140 ENUsing K / L, change the parental level. Press ENTER All 4 Using K / L, select the desired level Press ENTERParental Lock Default All RecordingUsing the Number buttons, enter the current password Function Setup Settings for Parental lock level cont’d142 EN 5 Press SETUP to exitStart Using K / L, select “Video”. Press ENTERSettings for Progressive Scan Mode 1 Press SETUP 2 Using K / L, select “Playback” Press ENTER144 EN 4 Using K / L, select “Progressive” Press ENTER6 Using / B, select “Yes”. Press ENTER Function Setup Settings for Progressive Scan Mode cont’dIf Picture is good, Select “Yes” Yes No 7 Using K / L, select “Yes”. Press ENTER within 15 seconds8 Press SETUP to exit Video - Progressive Confirm again to use progressive scan3 Using K / L, select a setting. Press ENTER Settings for Still Mode1 Follow steps 1 to 3 on page 143 to display the Video setting menu 2 Using K / L, select “Still Mode”. Press ENTEROthers Troubleshooting Language code Glossary SpecificationsThe power does not turn on TroubleshootingPower Remote controlThe disc does not play Recording/Timer Recording/EditingNothing was recorded even though you set the timer setting correctly Timer Recording is not complete or did not start from the beginning“Repairing” appears on the TV screen Error messageOthers Troubleshooting cont’d The disc tray does not open when you press OPEN/CLOSE ACause Error messageSolution Editing Function Setup OthersCan I play DVD-Video that is bought in another country? Frequently Asked Questions152 EN Can I record to CD-R/RW? No, this unit records only DVDsAbkhazian Language codeLanguage CodeAnalog audio CPRM Content Protection for Recordable MediaGlossary 154 ENSampling frequency PlaylistProgressive Scan 525p/480p Regions codeOperating temperature 41Fº to 104Fº 5ºC to 40ºC Operating humidity Power requirements AC120 V, 60 Hz Power consumptionWeight Dimensions width x height x depthLimited Warranty Setup Recording Playback Editing Function Setup OthersLimited United States Warranty Digital Audio Video “DAV” Product - Exchange WarrantyOthers 158 ENIntroduction Basic SetupFunction Setup Connections