Installation
Step 2: Select Location
Step 2: Select Location
1.Select a location that is not subject to excessive heat or humidity. Keep the base unit and handset away from sources of electrical noise, such as motors and fluorescent lighting.
2.Determine if the base unit will sit on your desk or be wall mounted. If wall mounted, go to Step 6: “(Optional) Wall Installation” on page 19.
3.Place the base unit on a desk or tabletop near a standard 120VAC outlet and within reach of the Strata CTX digital line connection.
Important! Place the base unit to the right of the DKT. If placed on the left, the cordless antenna picks up a tone due to its close proximity to the DKT speaker and electronic parts.
Step 3: Place DKT3000-series Telephones into 2000-Mode
You must place your
In
•Only 16 characters by two lines display on the LCD.
•LCD Feature button does not work
•6SGLDO button does not work
➤To change DKT3000-series telephones into 2000-mode
1. On the DKT3000 telephone, press ++++ROG (simultaneously).
2. Press.
3. Press )% (or )% on the DKT3014). LED On = 2000 mode. LED Off = 3000 mode.
Note Flexible Buttons (FB) are numbered from the bottom up and left to right. )% for example would be the seventh button up on the left.
4. Press +ROG.
5. Lift the handset to exit programming mode. Wait a few seconds for the telephone to reset itself.
16 | Strata CTX |
