Toshiba DKT2204-CT manual Optional Wall Installation, Standard Wall Plate Mounting

Installation

Step 6: (Optional) Wall Installation

Step 6: (Optional) Wall Installation

Important! You must place your DKT3000-series telephone into 2000-mode before connecting the cordless telephone; otherwise, the 3000-series telephone will not work. See “Place DKT3000-series Telephones into 2000- Mode” on page 16 for instructions.

Standard Wall Plate Mounting

These telephones are designed to be mounted on a standard wall plate. To attach the wall mount stand to the base unit:

1.Select a wall location near a 120VAC outlet and within reach of the Strata CTX digital line connection.

2.Slide the wall mount stand into the notches at the top of the base unit, push the wall mount stand down and snap it into place (shown right).

3. Plug the AC adapter into the base unit.

4. Place the AC adapter cord inside the molded channel of the wall mount stand.

5. Plug one end of the telephone cord into the

LINE jack on the base unit. Optionally, plug one end of a Strata DKT telephone into the

PHONE jack. Then place the telephone

cord(s) inside the molded channel(s) on the bottom of the wall mount stand.

6.Plug the other end of the telephone cord into the modular wall jack.

7.Place the base unit on the posts of the wall plate and push down until it’s firmly seated (shown right).

8. Plug the AC adapter into a standard 120VAC wall outlet.

Note Do not use an outlet controlled by a wall switch.

Strata CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones 06/03 19