Handset Operation
Conference Calls Using Strata CTX
Conference Calls Using Strata CTX
You can conference together up to eight parties (including your own) - with up to six parties being external CO or network lines. The actual number of conference parties with acceptable volume levels depends on the local and far end telephone line conditions.
The person who initiates the conference call is the Master. If, after the conference is established and the Master exits the conference, the first station to have been added to the conference becomes the Master. If no other internal stations are included in the conference call, the call is disconnected.
➤To conference calls
1.While on a call, press &QI7UQ. You hear dial tone.
2.Call another station or outside line.
3.When the called party answers, press &QI7UQ. If you receive a busy tone or no answer, press &QI7UQ again to return to the original connection. All parties are conferenced.
4.Repeat the above steps to add lines to the conference. Keep in mind the maximum number of allowed conference parties.
➤To transfer conference control
1.Do Steps 1 and 2 above to add the line to which you wish to transfer conference control.
2.Announce the call and hang up to transfer the call. This station now becomes the conference “master” with the ability to add or delete parties.
➤To hold a conference call
➤ If you are the Conference Master, press the +ROG key once (or twice for Executive Hold) to place the conference call on hold. The other parties can continue with the conference.
➤ Press &QI7UQ to rejoin the conference at any time. When you return, you retain Master status.
Strata CTX | 33 |
