12. GENERAL MAINTENANCE
12.4 REMOVING JAMMED MEDIA
■Cleaning the Cutter Unit
WARNING!
1.Be sure to turn the power off before cleaning the cutter unit.
2.The cutters are sharp and care should be taken not to injure yourself when cleaning.
1.Loosen two screws and remove the cutter cover.
2.Remove the white screw and media guide.
3.Remove the jammed paper and trash.
4.Clean the cutter with dry cloth.
Screw
White Screw | Media Guide |
|
Fixed Cutter
Cutter Cover
Cutter Unit
Swing Cutter
5. Assembling is reverse order of removal.
■Cleaning the strip unit
WARNING!
Fig.
Be sure to turn the power off before cleaning the strip unit.
1.Lower the backing paper release bar to remove the jammed media.
2.Clean the strip roller and backing paper holder with ethyl alcohol.
Strip Roller
Backing Paper Holder
Backing Paper Release Bar
Fig.
