Toshiba EO1-33015 owner manual White Screw Stud Ribbon End Sensor Plate Pinch Roller Lever

12. GENERAL MAINTENANCE

EO1-33015

12.1 CLEANING

7.Turn the pinch roller lever to the right.

8.Remove the white screw and detach the ribbon end sensor plate.

White Screw

Stud

Stud

Ribbon End Sensor Plate

Pinch Roller Lever

Fig. 12-2

NOTE: When installing the ribbon end sensor plate, be sure to fit both studs in the notches of the ribbon end sensor plate.

9.Remove the pinch roller block, then clean the roller belt and feed roller with cloth moistened by alcohol.

Roller Belt

Pinch Roller Block

Feed Roller

Fig. 12-3

10. Reassemble the pinch roller block in the reverse order of removal.

12-2