Please see “LOCATION OF CONTROLS” for the location of each button used for the following operations.
SETTING THE DIAL MODE
Most phone systems use tone dialing. But, to use tone dialing, you must have a tone service dialing system supplied by your telephone company. Then you must set your telephone dial mode for the type of service you have. If you are not sure which type of service you have, do the following steps.
3
1, 5
6
2
qWith the phone in the Standby mode, press and hold FLASH until you hear a confirmation tone.
wPress TONE/
.
You hear a confirmation tone.
ePress TALK and listen for a dial tone.
rPress any number other than 0.
If the dial tone stops, you have tone service and your setting is complete. If the dial tone continues, you have pulse service and you must perform steps 5 and 6 below.
tWith the phone in the Standby mode, press and hold FLASH until you hear a confirmation tone.
yPress # and hear a confirmation tone. Your setting is complete for pulse service.
10
