8. SENDING TONE SIGNAL (for Pulse service user)
Even if you have Pulse service (the dial mode is set to Pulse), you can use this phone with banking and other phone services requiring touch tone signals.
qDial the service number and wait for the connection.
wPress TONE/
, then enter the numbers required. You will hear the tones on the line.
9. MUTING
Press MUTE to turn off the microphone during a conversation.
The TALK/BATT LOW LED blinks. You may speak to someone in the room without the caller overhearing.
To resume normal conversation, press MUTE or TALK .
10. PAGING
To locate the handset while it is off the base, press PAGE on the base unit. The handset beeps for 60 seconds, and IN USE/CHARGE LED blinks. To stop paging, press PAGE or any key at the handset, or return the handset to the base unit.
Note
You cannot page the handset during a call.
11. OUT OF RANGE
During a call, as you begin to move too far from the base, you first hear a clicking sound. As you travel farther, the noise increases. Then you should move close to the base unit. If you travel
13
