Replacing a telephone number
Just store the new number following the same steps in “1. STORING NUMBERS.”
The new number will replace the previously stored one.
2. DIALING A STORED NUMBER
qPick up the handset and press TALK . The TALK/BATT LOW LED lights.
wPress MEM .
eEnter the memory address (0 to 9). The stored number will be dialed.
Note
If you enter a memory address which does not have any stored number, error beeps sound.
3. INSERTING A PAUSE IN MEMORY
Use RDL/P (redial/pause) to make an outgoing call through a PBX or long distance. Each time you press RDL/P , a pause of about two seconds is inserted during the dialing sequence. If more than two seconds is needed, press RDL/P twice.
EXAMPLE: To store “0 PAUSE 1234567890” in memory address 4, press:
MEM 0 RDL/P 1 2 3 4 5 6 7 8 9 0 MEM 4
4. CHAIN DIALING
Combining ordinary dialing and memory dialing, you can dial a long telephone number with less steps.
EXAMPLE: Divide the number into two portions and store the first portion in memory address 1 and the second portion in memory address 2. When you call, press the following buttons;
TALK MEM 1 MEM 2
15
