5 APPENDIX
Troubleshooting
This section picks up troubleshooting from other manuals and describes them collectively.
Network setting checklists
Check if the network setting is correct according to checklists, and then specify the cause of the error and take an appropriate countermeasure. The checklists are introduced by functions. Look for a function you are using and refer to the corresponding item in the list. Note that the check- lists are extracts from the Network Administration Guide for Scanning Functions.
When this equipment cannot be detected over the network, check if the network cable is cor- rectly connected, and then refer to the following manuals:
yNetwork Administration Guide for Printing Functions Chapter 3 “TROUBLESHOOTING”
Equipment Detection and Printing Check
File storage
When an error has occurred in the file storage function, check the setting by referring to the list below.
No | Check Item | Yes | No | Countermeasure |
|
|
|
|
|
1 | Is the IP address of this | Next Step |
| Refer to the Setup Guide for |
| equipment correctly set? | Ö | Printing Functions and set the | |
| Ø | |||
|
|
| TCP/IP correctly. | |
|
|
|
| |
|
|
|
|
|
2 | Can you utilize the TopAc- | Next Step |
| Refer to the Setup Guide for |
| cess? | Ö | Printing Functions and set the | |
| Ø | |||
|
|
| HTTP correctly. | |
|
|
|
| |
|
|
|
|
|
3 | Is a folder where the file is |
|
| Refer to “Setting up Save as file |
| stored set correctly? |
|
| Settings” in the Setup Guide for |
|
|
|
| Scanning Functions and set the |
|
| Next Step | Ö | folder correctly. |
|
| Ø | According to the protocol selected | |
|
|
| ||
|
|
|
| in this step, setting the related |
|
|
|
| items in the “Setup” - “Network” |
|
|
|
| menu may be required. |
|
|
|
|
|
4 | Can the file be stored? |
|
| An error code is printed in the |
|
|
|
| Transmission/Reception Journal. |
|
| End | Ö | Refer to the “Error code list” in the |
|
|
|
| Network Administration Guide |
|
|
|
| for Scanning Functions. |
|
|
|
|
|
30 Troubleshooting
