2 SYSTEM REQUIREMENTS

18 System Requirements

System Requirements
This section describes the environments required for respective options (Network Printer Kit,
Scanner Upgrade Kit and Fax Kit). The functions available for users vary depending on the
installed option and condition of use.
The copying functions of this equipment do not require any special environments. You can utilize
these functions when you turn the power of this equipment ON.

General requirements

This equipment requires the following cables to connect with your computers:
For Ethernet Connection: 10BASE-T/100BASE-TX STP cable with a Category 5
RJ-45 connector
When the Scanner Upgrade Kit has been installed, the scanning function cannot be used with a
computer connected to the equipment with a USB.

When the Network Printer Kit and Scanner Upgrade Kit are installed

This equipment requires the following environments for scanning functions as well as the print-
ing functions:
Interface: Ethernet
Network protocol: TCP/IP, SMB, FTP, IPX/SPX
Network server: Windows file server (for storing files using SMB)
FTP server (for storing files using FTP)
NetWare file server (for storing files using IPX/SPX)
SMTP server (for Email transmission)

When the Network Printer Kit, Scanner Upgrade Kit and Fax Kit are

installed

This equipment requires the following environments in order to enable the InternetFax functions
and onramp/offramp gateway functions, as well as the printing functions, network fax functions
and scanning functions:
Interface: Ethernet
Network protocol: TCP/IP, FTP
Network servers: POP3 server (for InternetFax/Email reception)
SMTP server (for InternetFax/Email transmission)