-Please configure the Ethernet port. You may need to turn on DHCP and DNS.
-After you have configured the Ethernet port, follow the directions in the owner’s manual to check for a firmware update.
-If a firmware update is available for your player, it will take about 30 - 60 minutes to download and install.
When the later version of FW is available for your player, then:
1.A message will appear and the firmware update will automatically start.
2.When the firmware update is completed, the player will automatically turn itself off.
In case of model:
Please also follow steps 3 through 6
3.Power up the player again.
4.The player will display a message that another update will start.
5.Read the message and press OK. The message will disappear, and the second firmware update will automatically start. Please be patient during this process. (During the update, "VERUP" will flash on the display of the player.)
6.When the firmware update is completed, the player will automatically turn itself off.
-DO NOT UNPLUG, TURN OFF, OR USE ANY OTHER FEATURE OF YOUR PLAYER DURING THE FIRMWARE UPDATE PROCESS. Doing so will cause the writing of the firmware update to the player to be halted and the player may no longer operate properly. If the player stops working, please contact Toshiba Customer Service for your country.
-If no firmware update is available, the player will quickly exit the firmware update process.
-Please refer to the owner's manual and Update Procedure sheet for additional details.
2. If you have a PC with a
You may be able to download an ISO image file of the firmware update to your PC and copy it to a blank
3.If you are unable, or prefer not to obtain the firmware update by one of the methods described above
You may contact Toshiba Customer Service for your country and request that a firmware update disc be sent to you by mail.
